Pool Basic Double Evo Seko pH + ORP control system
- New version of the Pool Basic Evo Double SEKO model reference SPMBASPA0005, fully compatible model.
- Peristaltic pump Pool Dose SEKO pH+ORP
- pH and ORP control system with built-in peristaltic pumps
- It contains the necessary material for its installation.
- You can find the installation manual in the ''Download'' section.
Automatic pH and Chlorine Control (Redox)
An automatic pH and chlorine controller is an autonomous equipment that analyzes pre-set parameters and corrects the values when they are not ideal. These equipments provide accurate values so you can act faster and more accurately and obtain correct pH and chlorine levels to have a quality water.
It is a comfortable, optimal, practical and simple way to control one of the main parameters of the pool.
Having the pH and chlorine values adjusted is the key to have a clean and quality water. Remember that the main parameter to adjust is the pH, otherwise the disinfectant will not work.
Having an autonomous control system provides multiple advantages:
- System that guarantees optimal and efficient control
- Accuracy cl add the chemical necessary to achieve the optimum values.
- Less time will have to be spent on pool maintenance
- Reduced filtration time thanks to the constant control of the parameters.
- Savings on the chemical
Features Pool Dose Double pH + Redox
With Pool Basic Evo Double pH + Redox you will be able to keep the pH and chlorine levels at an optimal point thanks to its electrodes that automatically regulate the parameters set by the user.
The Pool Dose model with pH and Redox control features:
- IP 65 protection level
- Alphanumeric display
- Ball-bearing mounted wheel support for longer pump life
- New motors with longer life
- Transparent snap-on cover
- Two-roller PTFE casing for more proportional dosing
- Wifi connection for remote control via SekoLink
Packaging contents Pool Dose pH + Redox
- PoolDose pH/ORP WiFi peristaltic pump
- 2 pcs: PVC suction tube Crystal 4x6 (4 m)
- 2 pcs: Pressure hose Polyethylene (5 m)
- FPM 3/8" GAS valve
- 2 pcs: Probe holder PSS3
- 4 pcs: Tapping collar for PSS3 to 2" connection ( Ø 50mm)
- 2 pcs: Reduction for injection valve (1/2" to 3/8" female)
- 2 pcs: Foot valve
- Mounting bracket (with 6mm screws)
- Temperature probe
- pH and ORP probe
- pH4, pH 7, 465 mV and H2O solution
* The pH/ORP probes are subject to wear and tear and are therefore not covered by warranty.
Technical Characteristics Pool Dose pH + Redox
Dimensions | 240x304x137,2 mm |
Weight | 3,5 Kg |
Power supply (50 Hz) | 220-240 Vca |
Consumption | 12 W o 18 W |
Pump flow rate | 1,5 l/h |
Probe calibration | Automatic |
Maximum back pressure | 1,5 bar |
Pump dosing | Pause - Supply |
Device accuracy | +/- 0,1 pH; +/- 10mV |
Accuracy | +/- 0,02 pH; +/- 3mV |
Range | 0÷14,0 pH; Redox 0÷1000mV |
Installation instructions Pool Dose pH + Redox
- Type of pump
- Peristaltic
- Pump control
- Digital
- Level control input
- Yes
- Automatic control
- Yes