Dosing pump SEKO TEKNA AKS

Reference: AKS603NHP0000

(9) reviews

Wall mounted dosing pump with analogue interface and constant dosing
Flow rate adjustable by potentiometer in front panel, with two ranges of dosage.
Two range frequencies: (0-20% or 0-100%)
Manufacturer references:

- AKS 603: AKS603NHP0000

- AKS 800: AKS800NHP0000

- AKS 803: AKS803NHP0000

€185.00

Tax included

Model

+ shipping costs, see here

verified reviews(9)

Francisco A. published the 04/12/2024 following an order made on 24/11/2024

5/5

Muy profesional

DAVID S. published the 15/08/2024 following an order made on 30/07/2024

5/5

envois rapide

Ayuntamiento S. published the 04/05/2024 following an order made on 16/04/2024

5/5

Buena relación calidad/precio

Anonymous customer published the 12/06/2023 following an order made on 23/05/2023

5/5

Tudo correu bem com a compra

Anonymous customer published the 04/09/2022 following an order made on 23/08/2022

5/5

Correspond à notre commande, pas de surprise.

Anonymous customer published the 17/04/2021 following an order made on 12/04/2021

5/5

Easy installation and works perfectly.

Description

Dosing pump Seko

SEKO pumps offer solutions for injecting liquid into ducts and pipes from small pools to large water installations. In indoor and outdoor environments, depending on the model, they can measure parameters such as pH, ORP, conductivity, chlorine, oxygen, turbidity, ozone, bromine, etc. In our attached files, you can find a list with the compatibility of the body, gaskets and pipes of the dosing pumps according to the chemical you need to dose.

Tekna dosing pump

The Tekna Series is a range of solenoid driven metering pumps with analog or digital range with constant or proportional dosing. These multifunctional metering pumps ensure high performance for the chosen applications and provide high reliability by ensuring chemical compatibility in wetted parts. Depending on the field of application, pressure, flow rate and desired performance, you can choose between Tekna AKS, AKL, TPG, TPR and TCK.

Characteristics of Seko Tekna AKS metering pumps

Pump with analog potentiometer with two operating frequencies (0-20% and 0-100%), with led indicator.
The standard power supply of the pump is 100-240Vac 50-60Hz.
It is driven by a solenoid.
Standard PVDF-T pump heads
PTFE membrane material
Incorporates valve for manual purge
The casing is made of PP plastic, fiberglass reinforcement and IP65 protection.
Pump head with manual priming valve Operating status LED:

- Flashing when running.
- Slow flashing when pump stops.
- Fast flashing when the low level alarm is activated.

Depending on the chemical to be dosed, the best seals are:

- pH reducer--> VITON or EPDM seals
- pH increaser--> EPDM gaskets
- Chlorine liquid--> VITON

Technical characteristics serie AKS

Model	Pressure	Flow rate	cc/stroke	Injections /minute	Connections (mm)	Consumption (W)
	bar	l/h			IN/OUT	Minimum	Maximum
603	12	4	0,42	160	4/6	9	28
	10	5	0,52
	8	6	0,63
	2	8	0,83
800	16	7	0,39	300	4/6	15	26
	10	10	0,56
	5	15	0,83
	1	18	1,00
803	5	20	1,11	300	8/12	15	25
	4	25	1,39
	2	38	2,11
	0,1	54	3,00

Guide for the selection of dosing pumps

When selecting the metering pump model or its spare parts, it is essential to take into account the coding found on the side label. This coding not only identifies the model, but also provides crucial information, such as hydraulic characteristics, materials of the different components, power supply...

We consider the model AKS603NHP0000 to explain the coding:

1. The first field corresponds to the model: AKS

2. The second field corresponds to the hydraulic characteristics: 603

hidraulica

3. The third field refers to the voltage of the dosing pumps: N

alimentación

4. The fourth field refers to the head material: H

cabezal

5. The fifth field refers to the installation kit: P

kit instalacion

6. The sixth field refers to the seals: 0

The seals are crucial components in a dosing pump, and their choice must be based on the nature of the liquid to be dosed. We recommend that you consult the compatibility table to identify the most suitable seals according to the type of liquid you are dosing.

FKM-B or Viton: normally used for acidic products.
EPDM: normally used for alkaline products.

juntas

7. The seventh field is standard: 0

8. The eighth field refers to customizations:00

opcional

Tekna AKS pump components

	1	Power switch
	2	Adjustment area
	3	Dosing head
	4	Activation valve
	5	Delivery fitting
	6	Suction fitting
	7	Base support

Contents of the AKS pump package

Complete pump
Bottom filter (Fig. 1)
Injection fitting (Fig. 2)
4 meters of PVC pipe (transparent and flexible), for suction and for the connection of the bleed valve for manual priming (Fig.3)
2 meters of PE pipe (opaque and rigid), for the connection of the pump outlet with the injection point (Fig.3)
Plugs for fixing the pump
Bracket for wall mounting
Instruction manual
Power supply cable (2m), supplied without plug

Contents of the AKS pump package