Aqua-Stop - Pool leak sealer

Reference: 200048

(64) reviews

Seals all types of leaks.
Product specially formulated to seal small leaks and pores in swimming pools.
To plug pores or small cracks in surface or hydraulic circuit.
Viscous liquid to be added to pool water.
Water miscible product that solidifies on contact with air.
Container.1.5 kg (1L)
New formula! More concentrated, more effective.
Product NOT suitable for salt electrolysis pools

€25.13

Tax included

+ shipping costs, see here

verified reviews(64)

JAVIER U. published the 23/07/2024 following an order made on 30/06/2024

1/5

No ha dado resultado.

Paul R. published the 09/07/2024 following an order made on 04/07/2024

5/5

It works.

Daniel M. published the 18/06/2024 following an order made on 30/05/2024

5/5

Eficaz me a resuelto el problema

Estefanía L. published the 24/07/2023 following an order made on 25/06/2023

1/5

Fatal,una verdadera mierda,no vale

Comment from MomentosPiscina the 10/07/2023
Lamentamos que no haya funcionado según lo esperado, este producto tapona fugas de hasta 3 mm de diámetro o una pérdida de unos 80L de agua al día. Recomendamos contactar con un técnico que pueda verificar dónde se encuentra la fuga para poder solventarlo, ya que puede ser que sea una fuga relativamente grande.

Alvaro L. published the 18/06/2023 following an order made on 24/05/2023

2/5

Compre aquastop por fuga en piscina y tras realizar el tratamiento a pie de la letra . No me ha solucionado nada. No me ha funcionado. Seguiré investigando que ocurre.

Jose G. published the 12/06/2023 following an order made on 13/05/2023

1/5

No me ha servido para nada

Comment from MomentosPiscina the 29/05/2023
Gracias por tu opinión Jose, como bien comentamos en la ficha del producto, está indicado para fisuras de hasta 3mm de diámetro o 80L/día. En caso que no haber funcionado te recomendamos que un técnico revise dónde puede estar la fuga porque puede necesitar de una solución un poco más compleja.

Description

Leak plug for swimming pool AQUA-STOP:

Product to plug pores or small cracks on the surface or in the hydraulic circuit of the pool or spa. Product specially formulated to seal small leaks and pores in swimming pools. It is a viscous liquid that is added to the pool water that solidifies on contact with air.

This product is indicated for small cracks or pores, so if it is applied for larger leaks, the result may not be as expected. In this case, it is recommended to apply a second dose of product.

Add directly to the perimeter of the pool or via the skimmer in order to improve their performance

In 24 hours you will have the problem solved

Product efficacy spectacular

DOSE OF EMPLOYMENT: 1L/75 m³

* You can seal pores up to 3 mm in diameter, if the leak is larger or there are several leaks, the effectiveness of the product cannot be guaranteed.

Instructions for use Leak sealant Aqua Stop

1. Turn off the pool pump, put the filter in a position to BY-PASS or RECIRCULATION, it is important that the product does not pass through the filter.

2. Add 1L for each 75 m³ of water.

- If the leak is in the glass of the pool, adding the product directly into the surface water.

- If you do not know where the leak is, or is located in the pipes, add the product through the skimmer.

3. Past 40 minutes to hook up the pump and make it work for a minimum of 8 hours.

4. Mark the level of the water, and after 24 hours check to see if has changed.

5. Pools very large, you may need a second application of the product.

6. Once the product has acted, you can put the filter in the normal position.

7. After 24 hours of adding the product, you may bathe in the water of the pool.

NOTE: If you have a salt electrolysis pool, Aqua-Stop can only be used if the product does not pass through the chlorinator.

In this example of installation, you can close the two valves that we show framed and in this way it will not pass through the chlorinator.

Swimming pool equipment