Save Cell - Salt chlorinator protector

Salt electrolysis chemicals

Salt electrolysis is the "heart" of the equipment, it is the place where the disinfectant is generated and requires the surface to be as clean as possible. The disinfectant is key to have clean water but it is not enough to keep the water crystal clear and free of algae. That is why it is recommended to use other products like brighteners, algaecides, etc. But it is important that they are special products for salt electrolysis so that they do not damage the cell. 

Over the years, the cell wears out but it deteriorates faster if the water levels are not optimal. Fouling, high phosphate levels, algae proliferation, among others, can appear. 

For this reason, BEHQ introduces a line of special products for salt electrolysis that stand out for:

• Extending the useful life of the equipment
• Facilitating maintenance
• Increasing and improving maintenance
• Being healthy and respectful products

Of the products used for salt chlorinator equipment, the Save Cell product stands out.

Improved cell performance

The Save Cell product provides an answer to the main problems of the salt chlorinator: cell wear, lime scale and high phosphate levels.

Therefore, the benefits of applying Save Cell are:

• Increasing cell lifetime: preventing scale from adhering as long as there is active product in the water.
• Increasing chlorine production: limiting scale from adhering between the cell plates without losing production surface area.
• Facilitates maintenance: improves the quality and transparency of the water thanks to one of the components of the formula. 

Salt electrolysis equipment also requires chemical products for the proper development, performance improvement and maintenance. Consult in our online store the special Piscimar products for salt electrolysis. 

How to use Save Cell

1. Clean the cell with the special cleaning product CELNET. Immerse the electrodes for 10 minutes and rinse with plenty of water.
2. Shake well before use
3. Add 1L/ 10m³ of Save Cell water at start-up or maintenance, spreading over the entire perimeter.
4. Repeat the application every 2 months