Chlorine multiaction granulated 5 Kg

Granulated multiaction chlorine

The slow dissolving chlorine allows a continuous chlorination avoiding the loss of chlorine by the effects of the sun. This allows for slower dosing and therefore greater effectiveness over longer periods of time.

Multi-action chlorine has been specially formulated to eliminate bacteria, viruses and microorganisms preventing the development of algae and thus keeping the water crystal clear.

Advantages multifunction 3 action chlorine

• Triple action: chlorine disinfection, flocculant to clarify the water and algaecide to prevent algae growth in the pool. 
• Ideal for all types of pools: liner, polyester, gresite...
• Stabilizing action against UV radiation
• Ideal for daily pool water maintenance
• Products necessary for the treatment of the pool water in a single container

Types of pool chlorine 

• Dichlorine or granulated fast chlorine: shock treatment or start-up treatment
• Trichlor or slow dissolving chlorine: for daily / weekly pool water maintenance 
• Multiaction: multifunctional product composed of disinfectant, flocculant, anti-algae...

IMPORTANT: we do not recommend multiaction chlorine for removable pools or spas with cartridge filtration system. The flocculant can clog the cartridge and cause its deterioration.

In the removable pools or spas we recommend to apply chlorine and to complete with some clarificarte as the clarifying pool Superklar.

How to use granulated multifunction 

Initial treatment 

1. Check and regulate pH level to 7.2-7.6 ppm.
2. Add 10 gr. of granulated dichlorine per m³ of water.
3. Leave the equipment in operation
4. After 2 hours adjust pH of water using pH reducer or pH increaser
5. Continue with maintenance treatment

Maintenance treatment 

1. Adjust pH to 7.2-7.6 ppm
2. Add 1 to 2 g of multiaction chlorine per m³ of water. 
3. Mix the corresponding amount of chlorine in a bucket with water and distribute it throughout the pool.
4. Leave the equipment in operation 

NOTE: add the product at dusk and without the presence of bathers. 

Remember to perform a shock chlorination with dichlorine whenever there is a lack of transparency, after a storm or when the chlorine is much lower than optimal.

Properties multiaction chlorine granules 5 Kg

Chlorine levels in pool water 

To ensure a correct maintenance of the pool water it is important to control the pH and chlorine levels of the pool on a daily basis and regulate them with the appropriate products.

Optimal values pool parameters:

• pH: 7.2-7.6 ppm
• Free chlorine: 1-3 ppm
• Residual chlorine: 0.5 - 2 ppm
• Total chlorine: 0,5 - 1,5 ppm

Less than optimum chlorine will lead to the presence of bacteria or therefore algae growth. So, if you want a clean and crystal clear water, check the levels with a test strip and correct them.