Subtotal €0.00
Shipping To determinate
Total (VAT incl.): €0.00
Pump DAB EUROPRO 75T
search
  • Pump DAB EUROPRO 75T
  • Pump DAB EUROPRO 75T
  • Pump DAB EUROPRO 75T
  • Pump DAB EUROPRO 75T

Pump DAB Europro 75T

R00010397
  • DAB pump Europro 75 T.
  • Pool pump 0.75 HP T.
  • Improved lid for strength and easy cleaning.
  • Built-in filter with large capacity.
  • For the recirculation of water in domestic and residential swimming pools.
  • Dimensions mouths suction and drive 2 ".
  • Pump suitable for swimming pools with saline chlorination.
  • Model currently not available, its compatible model is the DAB Euroswim 75T

            - It has the same connections, so it is totally interchangeable. 

            - It has the same dimensions and hydraulic performance (flow rate). 

            - Just changes the lid opening

+ shipping costs, see here
Description

PUMP DAB EUROPRO 75 T

The three phase DAB Europro 75 0.75 HP water pump manufactured by DAB PUMPS is perfect for domestic and residential swimming pools. The Europro pump range provides high performance and an engine completely isolated from water.

PUMP FEATURES DAB EUROPRO

DAB pumps for swimming pools cover all the demands of the domestic and residential market with a range of motor powers from 1/2 HP to 3 HP. They are also suitable for applications that require the use of aggressive liquids, fish farms, agriculture and industry.

The design of these centrifugal pumps has evolved with an improved lid with greater resistance to internal pressure and easy maintenance. Silent and reliable engine, with a low noise emission of 60 dB and high efficiency of efficiency providing well-being and tranquility in the pool environment. Reliability and high performance is what characterizes this range of Europro DAB pumps.

All Europro water pumps include 2 "suction and delivery fittings and are reinforced with metal rings.

ELECTRICAL CHARACTERISTICS PUMP POOL DAB EUROPRO 75 T

  • Motor Type: Asynchronous
  • Type of service: continuous
  • Electrical insulation: class F
  • Degree of protection: IP55
  • Single-phase series voltage: 220/240 V 50Hz
  • Three-phase series voltage: 230/400 V 50Hz
  • Ball bearings: waterproof, water and moisture resistant
  • Service factor: S1

PUMP MATERIALS FOR POOL DAB EUROPRO 75 T

  • Pump body and a threaded pre-filter made of technopolymer reinforced with glass fibers.
  • Cover pre-filter made of transparent polycarbonate and anti-oxidation to ensure constant visibility.
  • Filter of nylon.
  • Turbine made of technopolymer reinforced with glass fibers, designed to ensure a total coverage and insulation of the motor shaft from the pumped liquid.
  • Diffuser of technopolymer reinforced.
  • Mechanical seal of carbon, alumina, NBR and AISI 316.
  • O-ring of the NBR pump body, screws and bushes in AISI 316 steel.
  • Plugs of butterfly for the filling and drainage, are not required to use tools to disassemble them and reassemble them.

TECHNICAL DATA EUROPRO 75 T

  • Full operating range up to 42 m3 / h with lifting height of up to 22 m.
  • Pumped liquid: clean or dirty water with suspended solids, water with chlorine / bromine percentages or water treated with saline chlorination.
  • Ph range: 6.5-8.4
  • Maximum liquid temperature (ºC): 60
  • Maximum ambient temperature (ºC): 50
  • Maximum working pressure (bar): 2.5

TECHNICAL DATA EUROPRO 75 T

DIMENSIONS DAB EUROPRO PUMP 75T

DIMENSIONS DAB EUROPRO PUMP 75T

DIMENSIONS DAB EUROPRO PUMP 75T

Data sheet
Flow rate m³/h (at 10 mca)
12 - 16 m³/h
Power
0,75
Current
Three-phase
Variable speed
No
Productos relacionados

Pump DAB Europro 50M

Pump DAB Europro 75M

Pump DAB Europro 100T

Pump DAB Europro 100M

Pump DAB Europro 150M