Dosing pump level probe

Dosing pump level control 

This accessory is an important complement if we do not have a control of the dosing pump periodically, since, its function is to alert when the pump has run out of chemical product to dose.

If we do not have this accessory, we have to make sure that the pump does not work without liquid, so it does not dose empty and cause damage. 

The level probe must be connected to the dosing pump by means of a BCN connector located at the bottom of the pump at one end and at the other end it must be coupled to the bottom filter. The bottom filter consists of the foot valve which incorporates a filter to prevent particles or dirt from entering. 

When the product is below the minimum level, the pump is deactivated and an alarm condition is indicated. 

This level probe is supplied with a bracket to connect to the foot valve of the Tekna, Maxima dosing pump.