Subtotal €0.00
Shipping To determinate
Total (VAT incl.): €0.00
Increaser PH PLUS LQ liquid
search
  • Increaser PH PLUS LQ liquid

Increaser PH PLUS LQ liquid

10403
  • pH increaser 
  • Liquid compound to raise the pH of water when it is below 7.2
  • Specially formulated to be dosed by pH regulating equipment.
  • Container of 20 L
€31.20

+ shipping costs, see here
100% secure payments

Order it before 16:00 of today and receive it between Mon 22 April and Wed 24 April with Transporte MomentosPiscina

Description

Regulate the pH in swimming pools 

The pH is a measure much to consider in the pools. The pH indicates the degree of acidity or basicity of the pool water. Expressed on a scale between the values 0 (high acidity) to 14 (high basicity).

The pH of the pool water with a pH value less than 7 is acidic and if it is greater, it is basic. It is indispensable to control and adjust the pH, if necessary, every day.

The ideal value of the pH of the pool water should always be between 7.2 and 7.6

PH scale
0
7
14
Acid
Neutral
Alkaline
     
0 - 7.1
7.2 - 7.6
7.7 - 14
Corrosive water for installation. Can irritate the eyes, skin
and mucous membranes
Water healthy and under control
Increased consumption of chemicals that are not acting correctly.

Problems in swimming pools due to poor pH regulation

A high pH causes

  • Reduction of the effects of the disinfectant, it is necessary to spend more product (chlorine or bromine) to disinfect the pool water.
  • Muddy waters
  • Irritation of eyes and mucous membranes
  • Destruction of the protective layer of natural skin
  • Scale deposits on the pool

A low pH causes

  • Corrosion of metal objects in pools (ladders, accessories, pool...)
  • Deterioration of the glass of the pool
  • Irritation of eyes and mucous membranes
  • Excessive use of disinfectant

Dosage and mode of use pH PLUS LQ Liquid

  1. To increase the pH by 0.2 points: add 3.5 liters of PLUS LQ per 100 m³ of water.
  2. It is a product specially formulated to be dosed in swimming pool water by means of automatic pH regulation and control equipment.
  3. Perform a control, if necessary on a daily basis, of the pH with an analyzer kit. The values should be between 7.2 and 7.6.

Properties pH PLUS Liquid

Appearance Clear liquid
Color Colorless
Density 20º 1,27 g/cm³
pH (20% aqueous solution) 14
Container 20 L
Data sheet
Coating
Gresite
Liner / Polyester
Water treatment with
Chlorine
Salt