Tee 90º PVC for threading
- Tee of 90º PVC for threading
- PVC-U fittings for pipe branching
- Pressure resistance and chemical resistance
- Sizes from 1/2" to 4"
Threaded PVC fittings
The PVC pressure tee is a fitting used to make a derivation in the conduction of fluids. This Cepex fitting complies with the EN 1452 standard, offering the highest quality and guarantee for the conduction of pressurized liquids, as shown by the certifications: AENOR, AFNOR, NF....
Cepex PVC tees are perfect for the conduction of fluids and the union of pipes at a 90º angle. In this case it is a fitting with threaded connections (female) so we recommend the use of PTFE tape to ensure tightness.
We have a wide range of sizes from 1/2" to 4" to be able to make the necessary derivations in each installation.
Thanks to the PVC-U material of the fittings, they offer both pressure and chemical resistance for use in water, chemical and waste pipelines, among other sectors.
Dimensions 90º tee for threading
The following table shows the outer diameter, normal pressure and references of the 90º tees:
Consult in the following table the dimensions of the 90º tees according to the outside diameter.
Pressure / temperature diagram
- Diameter
- 1¼”
1½”
1”
2½”
2”
3”
4”
½”
¾” - Angle
- 90º
- Union
- Threading