Reinforced Mixed Elbow 90º PVC for gluing and threading
- Reinforced PVC 90º mixed elbow for glueing and threading
- PVC-U fittings for PVC pipe couplings
- Glue female and BSP female threading
- Stainless steel reinforcement
- Dimensions from 20 x 1/2" up to 63 x 2"
Reinforced PVC elbows
Cepex PVC fittings stand out for their quality, reliability and durability, as well as the guarantee with multiple certificates: AENOR, AFNOR, NF...
PVC elbows are the ideal PVC fittings to make changes of direction in pipes at an angle of 90º, glued on one side (female) and threaded on the other side (female). We recommend the use of glue to glue PVC-U fittings. And the use of PTFE tape to guarantee the watertightness of the threaded fittings.
In addition, this elbow is especially recommended for works where higher pressure is required, as it is reinforced with stainless steel in the threaded part. In particular, it can withstand working pressures or higher nominal pressures, PN 16.
Consult our catalog of sizes to choose the PVC fitting that best suits your installation.
We have a wide range of dimensions and combinations to adapt the installation to your needs.
Cepex fittings provide both pressure and chemical resistance, so they can be used in water, chemical and waste pipelines, among other sectors.
Dimensions 90º reinforced mixed elbow
The following table shows the outer diameter, normal pressure and references of the reinforced mixed elbows.
Consult the following table for the dimensions of the reinforced mixed elbow for threading and gluing according to the outside diameter.
Pressure / temperature diagram
- Diameter
- 20
- Angle
- 90º
- Union
- Mixto
- Diámetro combinado
- 20 x ½”
25 x ¾”
32 x 1”
40 x 1¼”
50 x 1½”
63 x 2”