Male x female PVC threaded reducer
- PVC reducer for threading
- PVC-U fittings for joining pipes of different diameters
- Male threading and female threading
- Dimensions from 3/8" x 1/2" up to 4" x 2"
Guillermo E. published the 15/08/2024 following an order made on 23/07/2024
Ok ok ok
PVC threaded reducer
Cepex provides PVC fittings manufactured according to the EN 1452 standard, offering the highest quality and guarantee for the conduction of liquids under pressure, as demonstrated by the certifications: AENOR, AFNOR, NF....
The reductions are the PVC fittings used to make changes of pipes of different diameters and therefore to join sections of pipes and thus make the circuit of the installation.
This reduction is composed by one end of a diameter with threaded connections (male) and by the other end of another diameter with threaded connections (female). We recommend the use of glue to glue the PVC-U fittings and the use of PTFE tape to guarantee watertightness.
Find in our catalog the threaded reductions you need to adapt your installation, from 3/8" x 1/2" to 4" x 2".
Cepex fittings are resistant to both impact and stress, as well as guaranteeing chemical resistance and durability thanks to the PVC-U materials they are made of.
PVC threaded reducer dimensions
The following table shows the external diameter, the normal pressure and the product references:
Consult in the following table the dimensions of the reductions according to the external diameter.
Pressure / temperature diagram
- Diameter
- 1¼” x 1½”
1¼” x 1”
1¼” x ½”
1¼” x ¾”
1½” x 1¼”
1½” x 1”
1½” x 2”
1½” x ¾”
1” x 1¼”
1” x ½”
1” x ¾”
1” x ⅜”
2½” x 1¼”
2½” x 1½”
2½” x 2”
2½” x 3”
2” x 1¼”
2” x 1½”
2” x 1”
2” x 2½”
3” x 1½”
3” x 2½”
3” x 2”
3” x 4”
4” x 2½”
4” x 2”
4” x 3”
½” x ¾”
½” x ⅜”
¾” x 1”
¾” x ½”
¾” x ⅜”
⅜” x ½” - Union
- Threading
- Reduced diameter
- 32-25 x 25
- Typology
- Threaded