StarPump II 1.5 HP

Hayward Starpump II 

Hayward offers a wide range of solutions for water treatment, among these solutions are the classic pumps that are characterized by being robust and reliable. They offer a wide variety of pumps among which we highlight the Starpump II model that combines a compact design and unalterable materials to enjoy performance and long life. 

The Starpump II pool pump is a model fully compatible with Hayward's Powerline Plus and Max-Flo series.

Starpump II pool pump features

• Compact design suitable for small technical rooms
• Suitable pump for small, medium and above ground pools
• Available in power ratings from 0.5 hp to 1.5 hp in single-phase current
• Flow range from 8 m³/h to 15 m³/h (at 8 mc.a.)
• Includes pre-filter basket with 1 liter capacity.
• Recommended for pools up to 90 m³.
• Transparent pre-filter cover with butterfly locking and quick opening of the cover

Starpump II self-priming pump technical features

• Emptying lid for easy hibernation
• 50 mm suction and delivery fittings
• IPX5 protection, preventing solid particles and liquids from entering the motor interior
• Built-in thermal protection
• Turbine in Noryl with brass insert
• Components injected in reinforced resin insensitive to corrosion, offering a longer service life
• Resistance to chemical and saline corrosion in normal use
• Ceramic on carbon obturator
• Low noise level
• Low electrical consumption

Specifications Starpump II 1,5 HP pool pump

The Starpump II 1,5 HP pool pump is characterized by its long durability and efficiency, this model has a power of 1,5 HP single-phase current and provides a flow of 15 m³/h at 8 m.c.a.

This pump is fully compatible with the Hayward Powerline Plus and Max-Flo models.

The pump has 50 mm diameter female threaded connections. 

The Hayward Starpump II model is distinguished by its low power consumption and low noise level.

Technical Data Starpump II 1.5 HP

Dimensions Starpump II 1,5 HP

Starpump II 1,5 HP Operating Table

Starting and priming instructions pool pump

1. Fill the filter body with water up to the level of the suction pipe (Never start the pump without water).
2. Open all the suction and delivery valves (also the filter air bleed, if any)
3. Start the unit and wait for priming for a certain period of time (priming will depend on the suction height and the length of the suction pipe).

Maintenance of the pool pump 

1. Regularly clean the pre-filter basket and check the seal of the pre-filter cover.
2. Keep the motor clean and dry and make sure that the ventilation holes are free of obstruction.
3. Occasionally a leak may occur in the mechanical seal and in this case it must be replaced.