Dosing pump SEKO Invikta KCS

Dosing pump Seko 

SEKO pumps offer solutions for injecting liquid into ducts and pipes from small pools to large water installations. In indoor and outdoor environments, depending on the model, they can measure parameters such as pH, ORP, conductivity, chlorine, oxygen, turbidity, ozone, bromine, etc. In our attached files, you can find a list with the compatibility of the body, gaskets and pipes of the dosing pumps according to the chemical you need to dose.

Invikta Dosing Pump

The Invikta series is an electromagnetic metering pump that provides great reliability, quality manufacturing and flexibility as it can be used for a wide variety of applications such as: OEM, swimming pools, car washes, cooling towers, reverse osmosis systems, among many others. It is an analog pump, constant dosing and manually adjustable from 0 to 100.

It is an analog pump, with constant dosing and manually adjustable from 0 to 100. It is a compact model thanks to its small size and design.

Seko Invikta KCS dosing pump features 

• Pump with analog potentiometer for manual adjustment of the delivery rate from 0 to 100%. 
• The standard power supply of the pump is 230Vac 50-60Hz, with 24Vac option on request.
• It is operated by a solenoid. 
• Standard PVDF-T pump heads
• PTFE membrane material
• Incorporates valve for manual purge
• The casing is made of PP plastic, fiberglass reinforcement and IP65 protection. 
• Pump head with manual priming valve Operating status LED: 

                                      - Flashing when running.

                                      - Slow flashing when pump stops. 

                                      - Fast flashing when the low level alarm is activated.

• Depending on the chemical to be dosed, the best seals are: 

                                      - pH reducer--> VITON or EPDM seals.

                                      - pH increaser--> EPDM gaskets

                                      - Liquid chlorine--> VITON seals 

Technical characteristics KCS series 

Guide for the selection of dosing pumps 

When selecting the metering pump model or its spare parts, it is essential to take into account the coding found on the side label. This coding not only identifies the model, but also provides crucial information, such as hydraulic characteristics, materials of the different components, power supply...

We consider the model KCS632AVFK00 to explain the coding:

1. The first field corresponds to the model: KCS 

2. The second field corresponds to the hydraulic characteristics: 632

3. The third field refers to the voltage of the metering pumps: A

4. The fourth field corresponds to the head and refers to the material of the head and seals: VF

Seals are crucial components in a metering pump, and their choice must be based on the nature of the liquid to be metered. We recommend you consult the compatibility table to identify the most suitable seals depending on the type of liquid you are dosing.

• FKM-B or Viton: normally used for acidic products.
• EPDM: normally used for alkaline products.

5. The fifth field refers to the installation kit: K

* The KCS 620 comes with the "SILENT" installation kit with level input.

6. The sixth field refers to the customizations: 00

Invikta KCS pump components

	1	Delivery fitting
	2	Suction fitting
	3	Priming valve
	4	Knob for frequency regulation
	5	Supply inlet
	6	Inlet for level probe
	7	Wall mounting bracket

Package contents KCS pump

• Complete pump
• Bottom filter (Fig. 1)
• Injection fitting (Fig. 2)
• 4 meters of PVC pipe (transparent and flexible), for suction and for connection of the bleed valve for manual priming (Fig.3)
• 2 meters of PE pipe (opaque and rigid), for the connection of the pump outlet to the injection point (Fig.3)
• Plugs for fixing the pump
• Bracket for wall mounting
• Instruction manual
• Power cable (2m) with cable gland and connector

Dimensions of the KCS pump

KCS dosing pump installation diagram

Wall installation	Load mounting