Kit Mini Pools - Small pool treatment

Kit maintenance small swimming pools 

For a correct starting and maintenance of your pool it is important to have all the necessary products to obtain a clean and crystalline water.

The amount of chemical to add to the removable pools, removable spas or small pools is less than the amount of product that is added in large pools. For what we have a kit of essential and necessary products to a reduced size, with all the products for a perfect maintenance of the water of your swimming pool. 

With the chemical products included in this kit you will be able to regulate the pH, disinfect the pool, protect it against algae and bacteria and get a transparent water. 

Do you still have doubts? We explain you which products are included and the steps to follow to enjoy a good swim!

Removable pool maintenance kit 

The Kit Mini Pools is composed of:

• 3 units of Low pH
• Maxiclor 20: slow-dissolving chlorine tablets
• Dichloro GR: fast-dissolving granulated chlorine
• Cleanpool: special clarifier for mini pools
• Floating chlorinator
• pH and free chlorine test strips
• Dosing cup
• Multilingual instruction manual 

Keeping pool water clean 

We want both the start-up of your pool and the maintenance during the summer to be carried out in the easiest and quickest way so that you can enjoy your pool with your family and friends. 

1. Check pool elements 

Before starting with the treatment itself we must check the connections, the filtration system (pump, filter, purifier) and clean the pool of leaves or other dirt. 

2. To regulate pH levels

The pH is the most important parameter, if it is not adjusted to the optimal level the disinfectant will not make effect. 

• Use the FTK MINI test strips to determine the pH level.
• Optimum value between 7.2-7.6 ppm
• Adjust with low pH if the value is higher than 7.6 
• Adjust with pH increaser

3. Disinfection

To prevent the appearance of germs and bacteria, disinfectant should be used, chlorine is one of these. 

Starting up the pool

1. Adjust pH
2. Add 15 g/m³ of DICLOR GR 
3. Dilute the product in a bucket with water and spread it around the pool.
4. Leave the equipment in operation for 6 to 12 hours.
5. Analyze pH level and regulate
6. Place 1 tablet of MAXICLOR 20 in the floating chlorinator per 10m³ per week.

Water maintenance

        1. Check pH and adjust levels
        2. Adjust chlorine level.
           - The optimum free chlorine value is between 1-3 ppm.
           - Add one MAXICLOR 20 tablet every 10m³ per week in the floating dosing unit.
        3. Leave the equipment in operation 

NOTE: product dosages may vary depending on temperature, number of bathers, hours of operation, among other factors.

IMPORTANT: If algae, turbidity or after a storm are observed in the pool, perform a shock chlorination with DICHLORO GR. Add 30g/ m³ diluted beforehand in a bucket of water and spread it around the pool. 

4. Protection against algae 

It is essential to control the pH and chlorine levels to avoid the proliferation of algae in the pool. We recommend using an algaecide such as Algiklean to prevent and reduce algae growth. 

5. Transparency 

One of the main problems in swimming pools are the small particles that are difficult to collect and that cloud the water. In order to eliminate and obtain crystal clear water we supply the Cleanpool MINI product.

• Compatible with any type of filter: cartridge, filter bags, sand, glass...
• Maintenance dosage: 1 Cleanpool tablet per week in the skimmer, filter or motor pre-filter.
• Turbid water dosage:

          1. Wash the filter
          2. Add 2 tablets of Cleanpool in the skimmer, filter or motor pre-filter.
          3. Run filtration for 24 hours.
          4. After 24 hours wash the filter

Before doing the treatment with Cleanpool it is important to adjust the pH and chlorine to obtain an impeccable water. 

Buy the mini pool kit and enjoy the swimming season with all the essentials