CTX Phosfree phosphates remover

HOW TO REMOVE PHOSPHATES FROM THE POOL?

Phosphates are the food of algae and algae are the main enemies of the pool. So if you remove phosphates from the pool water you will avoid algae formation. 

Phosphates can be found in pool water for different reasons: weather conditions, sticking to swimmers, farmland in the surroundings, using well water...

CTX Phosfree's product is specially formulated to eliminate phosphates and prevent the appearance and growth of algae. 

CHARACTERISTICS OF THE PRODUCT PHOSFREE

• Prevention product
• Compatible with all types of disinfectants 
• Improves the performance of salt electrolysis equipment or salt chlorinators
• Easy and simple to use
• Formulated with lanthanum

IDEAL LEVEL OF PHOSPHATES

A phosphate concentration of less than 125 ppb (parts per billion) should be maintained to prevent algae formation. To find out the level of phosphates in your pool water you can use the test strips indicated to analyze the level of phosphates

STEPS TO REMOVE PHOSPHATES FROM THE POOL

INITIAL TREATMENT

1. Perform a phosphate level analysis with the phosphate test strips
2. Perform filter cleaning
3. Calculate the required amount of product and pour the dose of product into the pool cup. Check the dose in the table.
4. Maintain the filtration system for 24 hours 
5. After 48 hours, analyze the level of phosphates. If necessary, repeat the process.

MAINTENANCE TREATMENT

1. Make sure the filter is clean
2. With the equipment running and without the presence of swimmers add 60 ml for every 50 m3 every week
3. Maintain the filtration system for 24 hours 
4. A phosphate concentration of less than 125 ppb (parts per billion) should be maintained to prevent algae formation.

PROPERTIES OF PHOSFREE - PHOSPHATE REMOVER