Inground pool house with holes

Swimming pool filter house

You don't know where to place all the components of your pool filtration system? You do not have space in the garage or you do not want to incorporate a visible house in the garden? We have the solution for you, an inground pool house, this way you will have all the components of the filtration system in a technical room and you will not have it in sight nor will it occupy a space in your garden.

It is a compact without interior assembly that is characterized by the ease of transport and storage. Designed to obtain maximum performance with minimum space. 

In-ground shed features 

• Prefabricated in polyester and fiberglass.
• Excellent exterior finish with gel coat
• Lightweight lid with reinforced hinges 
• Outer cover in green color and inside of the house in marfi color.
• Ivory color booth base
• Supplied with holes for connections

We have 3 models of pool house depending on the diameter of the pool filter, from Ø350 mm to Ø800 mm.

Remember that the pool house comes without internal assembly, so you will have to buy the pump, filter and selector valve separately. You can purchase the pool filter complements in our online store. 

Assembly instructions 

1. Place the house on top of a reinforced concrete slab to prevent it from lifting or breaking. The surrounding soil must be well conditioned.
2. The buried part must protrude a minimum of 5 cm above ground level to avoid the risk of flooding.
3. In winter, it is recommended to disassemble and store the pump and electrical elements in a dry place.
4. The pool piping must reach the level of the compact's connection holes.
5. Provide a pressure drain for filter backwashing and rinsing, as well as a power supply with a suitable cross-section. 
6. The house must be located at a minimum distance of 3 m from the pool.

In-ground compact models 

In order to choose the right technical room house, it is important to check the filter diameter and to choose according to it.