Hut for sewage filtering system semi-buried

Swimming pool filtration booths 

You do not have a space to put the filtration system of the pool? Do you want an element that occupies the minimum space but that is practical and how to be able to access the different elements such as the pump, the filter or the pool selector valve? 

We have the solution for you, a semi-buried pool house with total opening of the cover. In this way you will be able to access easily to all the elements but at the same time it will be a little buried so that it is not so visible and does not occupy so much space.

Semi-buried shed features 

• Prefabricated in polyester and fiberglass.
• Full opening of the cover
• Ivory color

We have 2 models of pool huts depending on the diameter of the pool filter, from Ø450 mm to Ø750 mm. 

Remember that the pool house comes without internal assembly, so you will have to buy the pump, filter and selector valve separately. You can purchase the pool filter complements in our online store. 

Assembly instructions 

1. Take the measurements of the pool house and make a hole in the floor, leaving 150-200 mm extra on each side.
2. Put 4-5 mm gravel on the ground and level it, watching the drainage.
3. Install the house and level it. Connect all the connecting pipes and check that they are working properly
4. Fill in the 150-200 mm around the houses with concrete. 
5. Allow to dry and the installation will be finished.

Semi-buried compact models

In order to choose the right technical room house, it is important to check the diameter of the filter and choose accordingly.