Reinforced mixed tee 90º PVC for gluing and threading
- Reinforced 90º mixed PVC tee for gluing and threading
- PVC-U fittings for pipe branching
- Glue female and BSP female threading
- Stainless steel reinforcement
- Dimensions from 20 x 1/2" to 63 x 2"
Receive it between Tue 24 and Thu 26
PVC pressure fittings
Cepex PVC pressure fittings provide resistance, durability and adaptability, guaranteeing the quality with the different certificates: AENOR, AFNOR, NF...
The tees are PVC fittings that allow to join pipes and to derive the conduction of fluids. In this case it is a tee with a 90º angle, glued on one side (female) and threaded on the other side (female). We recommend the use of glue to glue PVC-U fittings. And the use of PTFE tape to guarantee the watertightness of the threaded fittings.
In addition, this tee is perfect for jobs where a higher working pressure or higher nominal pressure is required, as it is reinforced with stainless steel in the threaded part. In particular, it can withstand higher working pressures or nominal pressures, PN 16.
We have different diameter sizes from 20 x 1/2" to 63 x 2" so you can choose according to the needs you have for the installation.
Cepex pipes provide both pressure and chemical resistance, so they can be used in water, chemical and waste pipelines, among other sectors.
Dimensions 90º reinforced mixed tee
The following table shows the outer diameter, normal pressure and references of the 90º reinforced mixed tees.
Consult the following table for the dimensions of the reinforced mixed tees according to the outside diameter.
Pressure / temperature diagram
- Angle
- 90º
- Union
- Mixto
- Diámetro combinado
- 20 x ½”
25 x ¾”
32 x 1”
40 x 1¼”
50 x 1½”
63 x 2”