Reinforced Mixed Elbow 45º PVC for gluing and threading

PVC pipe fittings 

Cepex PVC pressure fittings provide resistance, durability and adaptability, guaranteeing the quality with the different certificates: AENOR, AFNOR, NF...

The elbows are the perfect PVC fittings to make changes of direction in the pipes at an angle of 45º, glued on one side (female) and threaded on the other side (female). We recommend the use of glue to glue PVC-U fittings. And the use of PTFE tape to guarantee the watertightness of the threaded fittings.

In addition, this elbow is perfect for works where a higher working pressure or nominal pressure is required, as it is reinforced with stainless steel in the threaded part. In particular, it can withstand higher working pressures or nominal pressures, PN 16. 

We have different diameter sizes from 20 x 1/2" to 63 x 2" so you can choose according to the needs you have for the installation. 

Cepex elbows provide both pressure and chemical resistance, so they can be used in water, chemical and waste pipelines, among other sectors. 

Dimensions 45º reinforced mixed elbow

The following table shows the outer diameter, normal pressure and references of the reinforced mixed elbows.

Consult the following table for the dimensions of the reinforced mixed elbow for threading and gluing according to the outside diameter. 

Pressure / temperature diagram