Reduced PVC 90º tee for gluing
- Reduced 90º PVC tee for gluing
- PVC-U fittings for conduit branching
- Excellent resistance and durability
- Available in sizes from 25 x 20 up to 160 x 140
Receive it between Tue 24 and Thu 26
PVC material for swimming pools
The PVC pressure tee is an accessory used to make a derivation in the conduction of fluids. This Cepex accessory according to the EN 1452 standard offers the maximum quality and guarantee for the conduction of liquids under pressure, as demonstrated by the certifications: AENOR, AFNOR, NF....
The PVC-U tees are perfect for the conduction of fluids and the union in the pipes is made by gluing, so we recommend the use of glue.
This PVC fitting consists of a glued 90º angle. At both ends there is a diameter and at the other end a reduced diameter, so it is possible to join pipes with different sizes. We recommend the use of glue to glue PVC-U fittings.
In this case this tee has an angle of 90º and we have a wide range of sizes from 25 x 20 mm diameter up to 160 x 140 mm diameter to make the necessary derivations in each installation.
Cepex fittings provide both pressure and chemical resistance, which allows their use in water, chemical and waste pipelines, among other sectors.
Dimensios 90º tee reduces for gluing
The following table shows the outer diameter, the normal pressure and the references of the 90º reduced elbows to be glued:
Consult the following table for the dimensions of the reduced 90º threaded elbow according to the outside diameter.
Pressure / temperature diagram
- Diameter
- 25 x 20
32 x 20
32 x 25
40 x 20
40 x 25
40 x 32
50 x 20
50 x 25
50 x 32
50 x 40
63 x 20
63 x 25
63 x 32
63 x 40
63 x 50
75 x 32
75 x 40
75 x 50
75 x 63
90 x 40
90 x 50
90 x 63
90 x 75
110 x 50
110 x 63
110 x 75
110 x 90
125 x 63
125 x 75
125 x 90
125 x 110
140 x 75
140 x 90
140 x 110
140 x 125
160
160 x 90
160 x 110
160 x 125
160 x 140 - Angle
- 90º
- Union
- Gluing