Reduced 45º PVC elbow for gluing

Elbow of 45º with reduction

The main function of the elbows is to make changes of direction in the pipes and in this case the reduction elbow also joins pipes of different diameters. These are PVC fittings of the Cepex brand that are distinguished from other brands by their quality and guarantee, as demonstrated by their certifications: AENOR, AFNOR, NF....

This PVC accessory consists of a glued 45º angle. At one end a diameter and at the other end a reduced diameter, so it is possible to join pipes with different sizes. We recommend the use of glue to glue PVC-U fittings. 

This reduced elbow is available in two sizes:

• 50 x 50 - 40 
• 63 x 63 - 50 

Cepex fittings provide resistance both in pressure and chemistry, so they can be used in water, chemical and waste pipelines, among other sectors. 

Dimensions elbow 45º reduced

The following table shows the outer diameter, normal pressure and references of the 45ºelbows reduced: 

Consult in the following table the dimensions of the reduced elbow according to the outside diameter.

Pressure / temperature diagram