Mixed PVC union sleeve for gluing and threading
- Mixed coupling sleeve for gluing and threading
- PVC-U fittings for PVC pipe connection
- Glue female and thread female
- Dimensions from 16 x 3/8" up to 110 x 4".
PVC union pressure
Cepex PVC fittings are manufactured according to the EN 1452 standard, offering the highest quality and guarantee for the conduction of liquids under pressure, as demonstrated by the certifications: AENOR, AFNOR, NF....
The main function of PVC couplings is to link different pipe sections and thus be able to make the circuit in the installation. This sleeve is composed of a glued connection (female) and a threaded connection (female), we recommend the use of glue to glue the PVC-U fittings. We recommend the use of PTFE tape to guarantee the watertightness of the threaded fittings.
A wide range of sizes from 16 x 3/8" to 110 x 4" is available to choose the most suitable fittings for each installation.
Cepex fittings provide both pressure and chemical resistance, so they can be used in water, chemical and waste pipelines, among other sectors.
Mixed union sleeve dimensions
The following table shows the outer diameter, normal pressure and product references.
Consult the following table for the dimensions of the mixed coupling sleeve according to the outside diameter.
Pressure / temperature diagram
- Diameter
- 315
- Union
- Mixto
- Diámetro combinado
- 16 x ⅜”
20 x ½”
25 x ¾”
32 x 1”
40 x 1¼”
50 x 1½”
63 x 2”
75 x 2½”
90 x 3”
110 x 4”