Mixed Elbow 45º PVC for gluing and threading
- Mixed 45º PVC elbow for gluing and threading
- PVC-U fittings for PVC pipe couplings
- Glue female and thread female
- Dimensions from 20 x 1/2" up to 110 x 4"
PVC Mixed 45º Elbow
Cepex offers the maximum guarantee in PVC pressure fittings, as demonstrated by their certifications: AENOR, AFNOR, NF...
One of the most used fittings in the installations are the elbows, as these allow changes of direction in the pipes. In this case it is an elbow with a 45º angle, glued on one side (female) and threaded on the other side (female), we recommend the use of glue to glue PVC-U fittings. We recommend the use of PTFE tape to guarantee the watertightness of the threaded fittings.
We have a wide range of sizes of 45º elbows from 20 x 1/2" to 110 x 4" diameter. Choose the one that best suits your installation.
Cepex fittings provide both pressure and chemical resistance, so they can be used in water, chemical and waste pipelines, among other sectors. Thanks to the PVC-U material of the fittings, they offer durability and complete compatibility in demineralized water, drinking water, food fluids...
Dimensions 45º mixed elbow
The following table shows the outer diameter, the normal pressure and the references of the 45º mixed elbows.
Consult in the following table the dimensions of the mixed elbow for threading and gluing according to the outside diameter.
Pressure / temperature diagram
- Diameter
- 63
- Angle
- 45º
- Union
- Mixto
- Diámetro combinado
- 20 x ½”
25 x ¾”
32 x 1”
40 x 1¼”
50 x 1½”
63 x 2”
75 x 2½”
90 x 3”