Dosing pump SEKO KOMPACT AMC

Seko dosing pump

Seko pumps offer a wide range of solutions for the precise injection of liquids into ducts and pipes, from small pools to large aquatic installations. With models designed to operate in both indoor and outdoor environments, these pumps can measure a variety of parameters such as pH, ORP, conductivity, chlorine, oxygen, turbidity, ozone, bromine, among others. In our attachments, you will find a detailed list of the compatibility of the body, seals and tubing of the dosing pumps with different chemicals, to ensure accurate and safe dosing. 

Kompact dosing pump

The Kompact Series represents a line of solenoid driven metering pumps, characterized by their ability to provide constant flow rates that can be manually adjusted by means of a dial located on the front panel. These pumps ensure optimum performance in selected applications, offering high reliability and guaranteeing chemical compatibility in wetted parts. Depending on the application environment, you can choose between Kompact AMC with Viton or EPDM seals to meet your specific needs.

Seko Kompact AMC dosing pump features

• Pump with manual drive frequency adjustment from 0 to 100% by means of analog potentiometer.
• Standard power supply of the pump is 230Vac 50-60Hz, with 24Vac option on request. 
• PTFE material diaphragm. 
• Comes with valve for manual purge.
• The casing is made of PP plastic, fiberglass reinforcement and IP65 protection.
• According to the chemical to be dosed, the best gaskets are: 

            - pH reducer--> VITON or EPDM seals.

            - pH increaser--> EPDM seals

            - Liquid chlorine--> VITON seals 

Kompact AMC operating modes

- Constant mode (switch in position C)

The pump doses the selected percentage manually with the potentiometer.

Steady green LED goes off with each stroke of the pump

Green LED flashing with the potentiometer at 0.

- Proportional mode (switch in position P)

With the potentiometer at 100% and after receiving four pulses (pulse trigger counter), the pump performs one stroke.

The potentiometer is designed to increase the number of external pulses received, after which the pump performs a stroke.

Here are some examples of operation:

Steady orange led turns off with each stroke the pump performs.

Flashing orange led with the potentiometer at 0.

Technical characteristics AMC series

Model	Pressure	Flow rate	cc/stroke	Injections/minute	Connections (mm)
	bar	l/h			Suction	Discharge
200	10	3,0	160	0,31	4/6	4/6
	8	5,0		0,52

Guide for the selection of dosing pumps

When selecting the metering pump model or its spare parts, it is essential to take into account the coding found on the side label. This coding not only identifies the model, but also provides crucial information, such as hydraulic characteristics, materials of the different components, power supply...

We consider the model AMC200NHH0000 to explain the coding:

1. The first field corresponds to the model: AMC

2. The second field corresponds to the hydraulic characteristics: 200

3. The third field refers to the voltage of the dosing pumps: N

4. The fourth field refers to the head material: H

5. The fifth field refers to the installation kit: H

6. The sixth field refers to the seals: 0

The seals are crucial components in a dosing pump, and their choice must be based on the nature of the liquid to be dosed. We recommend that you consult the compatibility table to identify the most suitable seals according to the type of liquid you are dosing.

• FKM-B or Viton: normally used for acidic products.
• EPDM: normally used for alkaline products.

7. The seventh field is standard: 0

8.  The eighth field refers to customizations:00

Kompact AMC pump components

	1	Área de regulaciones
	2	Cabezal dosificador
	3	Válvula de cebado
	4	Racor de impulsión
	5	Racor de aspiración
	6	Soporte de montaje

Wall bracket drilling template

AMC pump package contents

• Complete pump
• Bottom filter 
• Injection fitting 
• 4 meters of PVC pipe (transparent and flexible), for the suction and for the connection of the bleed valve for manual priming 
• 2 meters of PE pipe (opaque and rigid), for the connection of the pump outlet with the injection point 
• Plugs for fixing the pump
• Bracket for wall mounting
• Instruction manual

Dimensions Kompact AMC series

AMC pump control panel