Solenoid valve irrigation, TORO P 220

Solenoid valve irrigation, TORO P 220. Why choose it?

The solenoid TORO irrigation P-series 220, as all models from this manufacturer, is an electric valve is designed especially for commercial applications with pressures up to 15.2 bar, but also incorporate regulation of the flow rate from 0.3 to 6.9 bar.

These valves these are made of nylon reinforced with glass fibre industrial quality. This is a electrpválvula of irrigation, ideal to work at a pressure of 10 bars with flows from 20 to 568 lpm (5 to 150 GPM).

Valves irrigation electric TORO P 220 have the option of precise, pressure control with compact EZReg™ Dial (can be factory installed). The technology does not affect the load loss unlike competitive valves. The regulation of pressure works both in the electrical mode as in the manual mode, and allows the maintenance under pressure.

The solenoid is optional Spike-Guard™ has a very low-energy, so it can be used wires of lesser thickness; it also allows for the simultaneous use of the double valves in the same transformer, saving energy and money.

TORO offers the confidence that the valve TPV will work right the first and for many years.

Features Solenoid valve irrigation, TORO P 220

• Manufactured in nylon reinforced with fiberglass and stainless steel resistant to corrosion.
• Pressure regulation both in automatic mode as manual.
• Flow design live, for more precise control.
• Available settings in globe or angle.
• Ideal for working at a pressure of 10 bars with flows from 20 to 568 lpm (5 to 150 GPM).
• The water passes through a filter to remove the obstruction in the bore of the solenoid. The filter is accessible from the top.
• The slow closure reduces the water hammer.
• The flow regulator, adjustable flow rate and zero.
• Diaphragm double-lip rough, in santopreno to prevent leaks.
• Solenoid injected in a mould with a plunger captive.
• Precise Control of the pressure regulator, EZReg ® (factory installed or to be installed in the field) don't need to pull the solenoid.
• The pressure can be adjusted while operating manually or electrically, under pressure.
• Without tubes external to the electric models, or models with pressure regulator.
• Easy maintenance, without removing components.
• Solenoid encapsulated, injected into the mold, with the core captive.
• Solenoid in purple for recycled waters.
• Accepts solenoids DC.
• A sealing gasket in the plug input.
• 3 screws SS on the lid that accommodate a hex screwdriver or Phillips screwdriver.
• Cables of 45 cm for easy installation.

Specifications Solenoid valve irrigation, TORO P 220

• Female thread 1”, 1 1/2”, 2” and 3”, with flow regulator.
• Flow of work:

- from 20 to 180 l/min. for the 1”
- 114 to 416 l/min. for the 1 1/2”
- from 300 to 680 l/min. for the 2” and 3”.

• Working pressures from 0.7 to 15 kg/cm2.
• Consumption to boot to 0.4 mpa and maintained for 0.2 amp.
• It adapts to the pressure regulator EZR-100 to output a regulated pressure of 0.3 to 7 kg/cm2.
• Difference of minimum pressure 0.7 kg/cm2.
• Connection globe or angle.