Diffuser TORO irrigation 570 XF

Features Diffusers 570 XF

• Compound for plastic for great durability
• Pier contraction of stainless steel.
• In the case of applications of low pluviometria, you agree to the nozzles Maxijet.
• Black cap small diameter (2"), with a lower visibility reduces the probability of vandalism.
• It has an air seal at low pressure to 1 bar.
• Compatible with all nozzles and diffusers TORO, including the nozzle burbujeadora 570 MPR, TVAN and low angle nozzles.
• Bodies supplied with drainage plug, for a simple purging of the piping and easy extraction of the stem of the diffuser.
• Mechanism of full closure of the flow "X-Flow", housed in the interior of the stem, allows you to:

-Reduce 98% of the flow, in case that the nozzle to break apart or disassemble, discarding problems of deterioration due to breakage or vandalism.

-Change of mouthpiece while the irrigation is in operation.

• Board of hermetic closure, eliminates the discharge during the lift, allowing you to install more sprinklers in the same watering station
• Purge of water in the reverse clean the rod that ensures retraction.
• Simple re-placement of the irrigated arc, by the piston rod with ratcheting.

Specifications Diffusers 570 XF

• Flow rate: 0,2–12,5 L/min (0.05–3.30 GPM).
• Working pressure recommended maximum: 1,4-5,2 bar (20-75 PSI).
• Minimum working pressure for model COM: 1.7 Bar (25 PSI).
• Maximum working pressure: 5.2 bar (75 PSI).
• Outlet female thread 1/2".
• Dimensions:
• Diameter of the body:

– 35 mm (13/8") in the diffuser of bushes and on 4P, 6P and 6P-SI
– 41 mm (15/8") on 12P
– 44 mm (13/4") in models 12P-IF

• Diameter of cap: 50 mm (2").
• Side-outlet: 120 mm (43/4") from the top of the diffuser to the center of the decision.
• Valve Check-O-Matic maintains a column of water of 3 m.