Nozzle TORO irrigation MPR

Features nozzles TORO irrigation MPR

• All nozzles apply water at the same rate, thanks to its flow rate proportional to the surface area to water.
• Complete selection of arcs for all radius: 3/4, 2/3, 1/2, 1/3 and 1/4.
• Simple identification of the radio colors.
• 5 levels of trajectory
• Nozzles of 1.5 m that are adjusted to 1 m
• Arches of irrigation, normal and special
• Arches of watering for small areas

-Full set of arcs for nozzle radii of 3 m, 2.4 m and 1.5 m.

-Side strip of 1.2 x 5.5 m ideal for parking areas

-0,6 x 1.8 m for planters small and other tight areas

• Nozzles and filters packed separately in bags attached.
• Your screen filters prevent clogging of nozzles if there is little flow.
• Adjustment screw reduces the radius by up to 25% or so completely closes.
• Exact adjustment of the radius and the flow rate.
• Its pressure-compensating PCD prevents fogging, conserves water and can be installed or separately.
• You can install more sprinklers in the same watering station thanks to the low flow rates.
• Greater uniformity at the outer edges, eliminating scope is too long or short. Its new design provides an arch better.

Specifications nozzles TORO irrigation MPR

• Flow rate: 0,2-17L/min
• Pressure to which the performance of the nozzle to be optimal: 2 bars.
• Strip pressures recommended: 1,4 to 3,5 bars.
• Maximum pressure: 5,2 bar.