PVC-U Butterfly Valve Classic EPDM Series
- PVC-U Butterfly Valve (EPDM)
- PVC fittings ideal for fluid control using the minimum of space
- Good mechanical strength
- Sizes from D63 to D250
PVC butterfly valve
The butterfly valve is a PVC accessory used to stop or regulate the flow of a fluid through a pipe. This valve increases or decreases the flow by means of a disc called a butterfly. This disc rotates on an axis by means of a plate. This plate has a rod that is connected to a handle on the outside of the valve. By turning the handle, the plate rotates and the opening of the disc and therefore the flow rate is adjusted.
We have a wide range of dimensions and combinations to adapt the installation to your needs from 63 mm diameter up to 250 mm diameter and in nominal pressures of 10 and 6.
Features PVC-U butterfly valves - Classic Series
- Ideal for fluid control using very little space
- 100% factory tested
- Minimal pressure drop
- Resistance to multiple inorganic chemicals
- Excellent flow characteristics
- Good mechanical resistance
- PVC-U body
Butterfly valve specifications
- PVC-U body
- EPDM seals
- Zinc plated steel shaft
- PVC-U gate
- Aluminum handle
- Blue marking: EPDM seals, to be chosen according to the fluid to be used
Note: It is important to choose the type of valve according to the fluid and therefore to choose between EPDM or FPM (Viton) seals.
Dimensions butterfly valve Classic series
The following table shows the outer diameter, the normal pressure, and the references of the butterfly valve:
Refer to the following table for butterfly valve dimensions according to outside diameter.
Butterfly valve components
- PVC-U body
- Gate PVC-U
- Gate seal EPDM/ FPM
- Shaft AISI 316 stainless steel or galvanized steel
- Shaft seal EPDM / FPM
- Guide bushing PE
- Aluminum divider assembly
- Handle trigger aluminum
- Handle handle aluminum
Pressure / temperature diagram
- Diameter
- 63-75
90
110
125-140
160
200-225
250