Mixed Elbow 90º PVC for gluing and threading
- Mixed 90º PVC elbow for gluing and threading
- PVC-U fittings for PVC pipe couplings
- Glue female and thread female
- Dimensions from 20 x 1/2" up to 110 x 4"
Receive it between Tue 24 and Thu 26
PVC Elbows
Cepex offers the maximum guarantee in PVC pressure fittings, as demonstrated by their certifications: AENOR, AFNOR, NF....
PVC elbows are the ideal PVC fittings to make changes of direction in pipes at a 90º angle, gluing on one side (female) and threading on the other side (female). We recommend the use of glue to glue PVC-U fittings. And the use of PTFE tape to guarantee the tightness of threaded fittings.
A wide range of dimensions and combinations are available to adapt the installation to your needs.
Cepex fittings provide both pressure and chemical resistance, so they can be used in water, chemical and waste pipelines, among other sectors. Thanks to the PVC-U material of the fittings, they offer durability and complete compatibility in demineralized water, drinking water, food fluids...
Dimensions 90º mixed elbow
The following table shows the outer diameter, the normal pressure and the references of the mixed elbows.
Consult the following table for the dimensions of the mixed elbow for threading and gluing according to the outside diameter.
Pressure / temperature diagram
- Diameter
- 16
- Angle
- 90º
- Union
- Mixto
- Diámetro combinado
- 20 x ½”
25 x ¾”
32 x 1”
40 x 1¼”
50 x 1½”
63 x 2”
75 x 2½”
90 x 3”
110 x 4”