Elbow 90º PVC for gluing and male threading
- 90º PVC elbow for glueing and male threading
- PVC-U fittings for PVC pipe jointing
- Glue female and thread male
- Available in two dimensions: 50 x 1/2" and 63 x 2"
PVC pressure fittings
One of the most commonly used PVC fittings in installations are elbows, since they allow changes of direction in the pipes. Cepex PVC pressure fittings offer the maximum guarantee in all their products, as demonstrated by their certifications: AENOR, AFNOR, NF....
In this case, it is a mixed elbow with a 90º angle, gluing on one side (female) and threaded on the other side (male). We recommend the use of glue for gluing PVC-U fittings. And the use of PTFE tape to guarantee the watertightness of the threaded fittings.
This mixed elbow is available in two sizes:
- 50 x 1/2"
- 63 x 2"
Cepex fittings are characterized by their strength, durability and adaptability. Their chemical resistance allows them to be used in various sectors: water, chemical, waste, food... Thanks to their PVC-U material, they are fully compatible with demineralized water, drinking water, food fluids...
Dimensions 90º elbow glued and male threaded
The following table shows the outer diameter, the normal pressure and the references of the male and female threaded elbows:
Consult the following table for the dimensions of the mixed elbow for socketing and male threading according to the outside diameter.
Pressure / temperature diagram
- Diameter
- 32
- Angle
- 90º
- Union
- Mixto
- Diámetro combinado
- 50 x 1½”
63 x 2”