Dosing pump SEKO TEKNA TPR
- SEKO Tekna TPR electromagnetic dosing pump controlled by digital interface with proportional flow.
- Incorporates pH/Redox control.
- It has a PT100 sensor input for thermal compensation.
- In the section ''attachments'', you will find a file with the meaning of each letter of the reference of your pump, to know its characteristics.
- It incorporates a repeat alarm and an on/off input for remote control.
- Easy installation and replacement of connections.
- Manufacturer's reference (you will find it on the side of the pump):
-TPR 500 VITON seal (FPM): TPR500NHH0000
-TPR 603 VITON seal (FPM): TPR603NHH0000
-TPR 603 EPDM seal: TPR603NHH1000
-TPR 800 VITON seal (FPM): TPR800NHH0000
-TPR 800 EPDM seal: TPR800NHH1000
-TPR 803 VITON seal (FPM): TPR803NHH0000
-TPR 803 EPDM seal: TPR803NHH1000
Anonymous customer published the 20/11/2020 following an order made on 13/11/2020
Cumple lo que dice
Dosing pump Seko
SEKO pumps offer solutions for injecting liquid into ducts and pipes from small pools to large water installations. In indoor and outdoor environments, depending on the model, they can measure parameters such as pH, ORP, conductivity, chlorine, oxygen, turbidity, ozone, bromine, etc. In our attached files, you can find a list with the compatibility of the body, gaskets and pipes of the dosing pumps according to the chemical you need to dose.
Tekna dosing pump
The Tekna Series is a range of solenoid driven metering pumps with analog or digital range with constant or proportional dosing. These multifunctional metering pumps ensure high performance for the chosen applications and provide high reliability by ensuring chemical compatibility in wetted parts. Depending on the field of application, pressure, flow rate and desired performance, you can choose between Tekna AKS, AKL, TPG, TPR and TCK.
Characteristics of Seko Tekna TPR metering pump
- Digital electromagnetic pump with constant or proportional dosing according to the measured pH or ORP value.
- Standard power supply of the pump is 100-240Vac 50-60Hz.
- Standard heads in PVDF
- PTFE membrane material
- Incorporates valve for manual purging
- The casing is made of PP plastic, fiberglass reinforcement and IP65 protection.
- PT100 probe input for thermal compensation
- Snooze alarm relay
- On-Off input for remote control
- 4÷20 mA output for measurement repetition
- Flow rate calibration: can be calibrated manually or automatically
- Statistics: number of strokes, quantity dosed by the pump, number of start-ups
- Password: can enter programming and view all programmed values
- Flow alarm : allows to activate or deactivate the flow sensor.
- Level alarm
- Pump head with manual priming valve Operating status LED:
- Flashing when running.
- Slow flashing when pump stops.
- Fast flashing when the low level alarm is activated.
- Depending on the chemical to be dosed, the best seals are:
- pH reducer--> VITON o EPDM gaskets
- pH increaser--> EPDM gaskets
- Liquid chlorine--> VITON
Technical characteristics TPR series
Model | Pressure | Flow rate | cc/stroke |
Injections/minute |
Connections (mm) |
|
bar | l/h | Suction | Discharge | |||
500 | 20 | 0,4 | 120 | 0,06 | 4/6 | 4/7 |
16 | 0,8 | 0,11 | ||||
10 | 1,2 | 0,17 | ||||
6 | 1,5 | 0,21 | ||||
603 | 12 | 4,0 | 160 | 0,42 | 4/6 | 4/6 |
10 | 5,0 | 0,52 | ||||
8 | 6,0 | 0,63 | ||||
2 | 8,0 | 0,83 | ||||
800 | 16 | 7,0 | 300 | 0,39 | 4/6 | 4/6 |
10 | 10,0 | 0,56 | ||||
5 | 15,0 | 0,83 | ||||
1 | 18,0 | 1,00 | ||||
803 | 5 | 20,0 | 300 | 1,11 | 8/12 | 8/12 |
4 | 32,0 | 1,78 | ||||
2 | 62,0 | 3,44 | ||||
0,1 | 110,0 | 6,11 |
Guide for the selection of dosing pumps
When selecting the metering pump model or its spare parts, it is essential to take into account the coding found on the side label. This coding not only identifies the model, but also provides crucial information, such as hydraulic characteristics, materials of the different components, power supply...
We consider the model TPR603NHP0000 to explain the coding:
1. The first field corresponds to the model: TPR
2. The second field corresponds to the hydraulic characteristics: 603
3. The third field refers to the voltage of the dosing pumps: N
4. The fourth field refers to the head material: H
5. The fifth field refers to the installation kit: H
6. The sixth field refers to the seals: 0
The seals are crucial components in a dosing pump, and their choice must be based on the nature of the liquid to be dosed. We recommend that you consult the compatibility table to identify the most suitable seals according to the type of liquid you are dosing.
- FKM-B or Viton: normally used for acidic products.
- EPDM: normally used for alkaline products.
7. The seventh field is standard: 0
8. The eighth field refers to customizations:00
Tekna TPR pump components
1 | Power switch | |
2 | Adjustment area | |
3 | Dosing head | |
4 | Activation valve | |
5 | Delivery fitting | |
6 | Suction fitting | |
7 | Base support |
Package contents TPR pump
- Complete pump
- Bottom filter (Fig. 1)
- Injection fitting (Fig. 2)
- 4 meters of PVC pipe (transparent and flexible), for suction and for the connection of the bleed valve for manual priming (Fig.3)
- 2 meters of PE pipe (opaque and rigid), for the connection of the pump outlet with the injection point (Fig.3)
- Plugs for fixing the pump
- Bracket for wall mounting
- Instruction manual
- Power supply cable (2m)
Dimensions TPR dosing pump
500-600-603-800 | 803 | 500-600-603-800-803 |
Performance curve Tekna TPR series
TPR pump control panel
- Type of pump
- Electromagnetic
- Pump control
- Digital
- Level control input
- No
- Automatic control
- Yes