Dosing pump SEKO TEKNA AKL

Reference: AKL603NHP0000

(1) review

The SEKO Tekna AKL electromagnetic dosing pump is controlled via an analogue interface with constant dosing.
It doses chemical products (chlorine and ph) for the pool.
It is driven by a solenoid.
Other applications for the pump are: car washing, refrigeration, osmosis.
Its flow rate is constant with 2 frequency ranges (0-20% and 0-100%)
Manufacturer's references (can be found on the side of the pump):

-AKL 603 VITON seal: AKL603NHP0000

-AKL 800 VITON seal: AKL800NHP0000

€255.00

Tax included

Model

+ shipping costs, see here

verified reviews(1)

Anonymous customer published the 03/08/2021 following an order made on 19/07/2021

5/5

Ottimo prodotto è ottimo prezzo. Veloce la spedizione.

Description

Dosing pump Seko

SEKO pumps offer solutions for injecting liquid into ducts and pipes from small pools to large water installations. In indoor and outdoor environments, depending on the model, they can measure parameters such as pH, ORP, conductivity, chlorine, oxygen, turbidity, ozone, bromine, etc. In our attached files, you can find a list with the compatibility of the body, gaskets and pipes of the dosing pumps according to the chemical you need to dose.

Tekna dosing pump

The Tekna Series is a range of solenoid driven metering pumps with analog or digital range with constant or proportional dosing. These multifunctional metering pumps ensure high performance for the chosen applications and provide high reliability by ensuring chemical compatibility in wetted parts. Depending on the field of application, pressure, flow rate and desired performance, you can choose between Tekna AKS, AKL, TPG, TPR and TCK.

Features Seko Tekna AKL dosing pump

Electromagnetic analog pump with manually adjustable flow rate by potentiometer on the front panel.
Two operating frequencies (0-20% and 0-100%)
Operation indicator led
Standard pump power supply is 100-240Vac 50-60Hz
PTFE membrane material
Standard PVDF heads
Incorporates valve for manual purge.
The casing is made of PP plastic, fiberglass reinforcement and IP65 protection.
It has an inlet for connecting a level probe.
Depending on the chemical to be dosed, the best gaskets are:

- pH reducer--> VITON or EPDM seals
- pH increaser--> EPDM seals
- Liquid chlorine--> VITON

Technical characteristics AKL series

Model	Pressure	Flow rate	cc/stroke	Injections/minute	Connections (mm)
Model	bar	l/h	cc/stroke	Injections/minute	Suction	Discharge
603	12	4,0	160	0,42	4/6	4/6
	10	5,0		0,52
	8	6,0		0,63
	2	8,0		0,83
800	16	7,0	300	0,39	4/6	4/6
	10	10,0		0,56
	5	15,0		0,83
	1	18,0		1,00

Guide for the selection of dosing pumps

When selecting the metering pump model or its spare parts, it is essential to take into account the coding found on the side label. This coding not only identifies the model, but also provides crucial information, such as hydraulic characteristics, materials of the different components, power supply...

We consider the model AKL603NHP0000 to explain the coding:

1. The first field corresponds to the model: AKL

2. The second field corresponds to the hydraulic characteristics: 603

hidraulica

3. The third field refers to the voltage of the dosing pumps: N

alimentación

4. The fourth field refers to the head material: H

cabezal

5. The fifth field refers to the installation kit: P

kit instalacion

6. The sixth field refers to the seals: 0

The seals are crucial components in a dosing pump, and their choice must be based on the nature of the liquid to be dosed. We recommend that you consult the compatibility table to identify the most suitable seals according to the type of liquid you are dosing.

FKM-B or Viton: normally used for acidic products.
EPDM: normally used for alkaline products.

juntas

7. The seventh field is standard: 0

8. The eighth field refers to customizations:00

opcional

Tekna AKL pump components

	1	Power switch
	2	Adjustment area
	3	Dosing head
	4	Activation valve
	5	Delivery fitting
	6	Suction fitting
	7	Base support

Package contents TPG pump

Complete pump
Bottom filter (Fig. 1)
Injection fitting (Fig. 2)
4 meters of PVC pipe (transparent and flexible), for suction and for the connection of the bleed valve for manual priming (Fig.3)
2 meters of PE pipe (opaque and rigid), for the connection of the pump outlet with the injection point (Fig.3)
Plugs for fixing the pump
Bracket for wall mounting
Instruction manual
Power supply cable (2m)

Package contents AKL pump