Dosing pump SEKO TEKNA AKS
- Wall mounted dosing pump with analogue interface and constant dosing
- Flow rate adjustable by potentiometer in front panel, with two ranges of dosage.
- Two range frequencies: (0-20% or 0-100%)
- Manufacturer references:
- AKS 603: AKS603NHP0000
- AKS 800: AKS800NHP0000
- AKS 803: AKS803NHP0000
DAVID S. published the 15/08/2024 following an order made on 30/07/2024
envois rapide
Ayuntamiento S. published the 04/05/2024 following an order made on 16/04/2024
Buena relación calidad/precio
Roberto L. published the 12/06/2023 following an order made on 23/05/2023
Tudo correu bem com a compra
Anonymous customer published the 04/09/2022 following an order made on 23/08/2022
Correspond à notre commande, pas de surprise.
Anonymous customer published the 17/04/2021 following an order made on 12/04/2021
Easy installation and works perfectly.
Anonymous customer published the 27/02/2021 following an order made on 19/02/2021
Funciona bien, pero la anterior se averió sin motivo aparente y he tenido que sustituirla.
Dosing pump Seko
SEKO pumps offer solutions for injecting liquid into ducts and pipes from small pools to large water installations. In indoor and outdoor environments, depending on the model, they can measure parameters such as pH, ORP, conductivity, chlorine, oxygen, turbidity, ozone, bromine, etc. In our attached files, you can find a list with the compatibility of the body, gaskets and pipes of the dosing pumps according to the chemical you need to dose.
Tekna dosing pump
The Tekna Series is a range of solenoid driven metering pumps with analog or digital range with constant or proportional dosing. These multifunctional metering pumps ensure high performance for the chosen applications and provide high reliability by ensuring chemical compatibility in wetted parts. Depending on the field of application, pressure, flow rate and desired performance, you can choose between Tekna AKS, AKL, TPG, TPR and TCK.
Characteristics of Seko Tekna AKS metering pumps
- Pump with analog potentiometer with two operating frequencies (0-20% and 0-100%), with led indicator.
- The standard power supply of the pump is 100-240Vac 50-60Hz.
- It is driven by a solenoid.
- Standard PVDF-T pump heads
- PTFE membrane material
- Incorporates valve for manual purge
- The casing is made of PP plastic, fiberglass reinforcement and IP65 protection.
- Pump head with manual priming valve Operating status LED:
- Flashing when running.
- Slow flashing when pump stops.
- Fast flashing when the low level alarm is activated.
- Depending on the chemical to be dosed, the best seals are:
- pH reducer--> VITON or EPDM seals
- pH increaser--> EPDM gaskets
- Chlorine liquid--> VITON
Technical characteristics serie AKS
Model | Pressure | Flow rate | cc/stroke |
/minute |
Connections (mm) | Consumption (W) | |
bar | l/h | IN/OUT | Minimum | Maximum | |||
603 | 12 | 4 | 0,42 | 160 | 4/6 | 9 | 28 |
10 | 5 | 0,52 | |||||
8 | 6 | 0,63 | |||||
2 | 8 | 0,83 | |||||
800 | 16 | 7 | 0,39 | 300 | 4/6 | 15 | 26 |
10 | 10 | 0,56 | |||||
5 | 15 | 0,83 | |||||
1 | 18 | 1,00 | |||||
803 | 5 | 20 | 1,11 | 300 | 8/12 | 15 | 25 |
4 | 25 | 1,39 | |||||
2 | 38 | 2,11 | |||||
0,1 | 54 | 3,00 |
Guide for the selection of dosing pumps
When selecting the metering pump model or its spare parts, it is essential to take into account the coding found on the side label. This coding not only identifies the model, but also provides crucial information, such as hydraulic characteristics, materials of the different components, power supply...
We consider the model AKS603NHP0000 to explain the coding:
1. The first field corresponds to the model: AKS
2. The second field corresponds to the hydraulic characteristics: 603
3. The third field refers to the voltage of the dosing pumps: N
4. The fourth field refers to the head material: H
5. The fifth field refers to the installation kit: P
6. The sixth field refers to the seals: 0
The seals are crucial components in a dosing pump, and their choice must be based on the nature of the liquid to be dosed. We recommend that you consult the compatibility table to identify the most suitable seals according to the type of liquid you are dosing.
- FKM-B or Viton: normally used for acidic products.
- EPDM: normally used for alkaline products.
7. The seventh field is standard: 0
8. The eighth field refers to customizations:00
Tekna AKS pump components
1 | Power switch | |
2 | Adjustment area | |
3 | Dosing head | |
4 | Activation valve | |
5 | Delivery fitting | |
6 | Suction fitting | |
7 | Base support |
Contents of the AKS pump package
- Complete pump
- Bottom filter (Fig. 1)
- Injection fitting (Fig. 2)
- 4 meters of PVC pipe (transparent and flexible), for suction and for the connection of the bleed valve for manual priming (Fig.3)
- 2 meters of PE pipe (opaque and rigid), for the connection of the pump outlet with the injection point (Fig.3)
- Plugs for fixing the pump
- Bracket for wall mounting
- Instruction manual
- Power supply cable (2m), supplied without plug
Dimensions AKS dosing pump
603-800 | 803 | 603-800-803 |
Performance curve Tekna AKS series
AKS pump control panel
- Pump control
- Analog
- Level control input
- No
- Automatic control
- No