Dosing pump SEKO TEKNA AKL
- The SEKO Tekna AKL electromagnetic dosing pump is controlled via an analogue interface with constant dosing.
- It doses chemical products (chlorine and ph) for the pool.
- It is driven by a solenoid.
- Other applications for the pump are: car washing, refrigeration, osmosis.
- Its flow rate is constant with 2 frequency ranges (0-20% and 0-100%)
- Manufacturer's references (can be found on the side of the pump):
-AKL 603 VITON seal: AKL603NHP0000
-AKL 800 VITON seal: AKL800NHP0000
Anonymous customer published the 03/08/2021 following an order made on 19/07/2021
Ottimo prodotto è ottimo prezzo. Veloce la spedizione.
Dosing pump Seko
SEKO pumps offer solutions for injecting liquid into ducts and pipes from small pools to large water installations. In indoor and outdoor environments, depending on the model, they can measure parameters such as pH, ORP, conductivity, chlorine, oxygen, turbidity, ozone, bromine, etc. In our attached files, you can find a list with the compatibility of the body, gaskets and pipes of the dosing pumps according to the chemical you need to dose.
Tekna dosing pump
The Tekna Series is a range of solenoid driven metering pumps with analog or digital range with constant or proportional dosing. These multifunctional metering pumps ensure high performance for the chosen applications and provide high reliability by ensuring chemical compatibility in wetted parts. Depending on the field of application, pressure, flow rate and desired performance, you can choose between Tekna AKS, AKL, TPG, TPR and TCK.
Features Seko Tekna AKL dosing pump
- Electromagnetic analog pump with manually adjustable flow rate by potentiometer on the front panel.
- Two operating frequencies (0-20% and 0-100%)
- Operation indicator led
- Standard pump power supply is 100-240Vac 50-60Hz
- PTFE membrane material
- Standard PVDF heads
- Incorporates valve for manual purge.
- The casing is made of PP plastic, fiberglass reinforcement and IP65 protection.
- It has an inlet for connecting a level probe.
- Depending on the chemical to be dosed, the best gaskets are:
- pH reducer--> VITON or EPDM seals
- pH increaser--> EPDM seals
- Liquid chlorine--> VITON
Technical characteristics AKL series
Model | Pressure | Flow rate | cc/stroke |
Injections/minute |
Connections (mm) |
|
bar | l/h | Suction | Discharge | |||
603 | 12 | 4,0 | 160 | 0,42 | 4/6 | 4/6 |
10 | 5,0 | 0,52 | ||||
8 | 6,0 | 0,63 | ||||
2 | 8,0 | 0,83 | ||||
800 | 16 | 7,0 | 300 | 0,39 | 4/6 | 4/6 |
10 | 10,0 | 0,56 | ||||
5 | 15,0 | 0,83 | ||||
1 | 18,0 | 1,00 |
Guide for the selection of dosing pumps
When selecting the metering pump model or its spare parts, it is essential to take into account the coding found on the side label. This coding not only identifies the model, but also provides crucial information, such as hydraulic characteristics, materials of the different components, power supply...
We consider the model AKL603NHP0000 to explain the coding:
1. The first field corresponds to the model: AKL
2. The second field corresponds to the hydraulic characteristics: 603
3. The third field refers to the voltage of the dosing pumps: N
4. The fourth field refers to the head material: H
5. The fifth field refers to the installation kit: P
6. The sixth field refers to the seals: 0
The seals are crucial components in a dosing pump, and their choice must be based on the nature of the liquid to be dosed. We recommend that you consult the compatibility table to identify the most suitable seals according to the type of liquid you are dosing.
- FKM-B or Viton: normally used for acidic products.
- EPDM: normally used for alkaline products.
7. The seventh field is standard: 0
8. The eighth field refers to customizations:00
Tekna AKL pump components
1 | Power switch | |
2 | Adjustment area | |
3 | Dosing head | |
4 | Activation valve | |
5 | Delivery fitting | |
6 | Suction fitting | |
7 | Base support |
Package contents TPG pump
- Complete pump
- Bottom filter (Fig. 1)
- Injection fitting (Fig. 2)
- 4 meters of PVC pipe (transparent and flexible), for suction and for the connection of the bleed valve for manual priming (Fig.3)
- 2 meters of PE pipe (opaque and rigid), for the connection of the pump outlet with the injection point (Fig.3)
- Plugs for fixing the pump
- Bracket for wall mounting
- Instruction manual
- Power supply cable (2m)
Dimensions AKL dosing pump
Performance curve Tekna AKL series
AKL pump control panel
- Type of pump
- Electromagnetic
- Pump control
- Analog
- Level control input
- Yes
- Automatic control
- No