Dosing pump SEKO KOMPACT AMS 200

Dosing pump Seko

SEKO pumps offer solutions for injecting liquid into ducts and pipes from small pools to large water installations. In indoor and outdoor environments, depending on the model, they can measure parameters such as pH, ORP, conductivity, chlorine, oxygen, turbidity, ozone, bromine, etc. In our attached files, you can find a list with the compatibility of the body, gaskets and pipes of the dosing pumps according to the chemical you need to dose.

Kompact dosing pump

The Kompact Series is a range of solenoid driven metering pumps with constant flow rates controlled by a manually adjustable dial on the front panel. These metering pumps ensure high performance for the chosen applications and provide high reliability by ensuring chemical compatibility in wetted parts. Depending on the field of application you can choose between Kompact AMS in Viton or EPDM seal. 

Seko Kompact AMS dosing pump characteristics

• Pump with manual adjustment of the delivery rate from 0 to 100% via analog potentiometer.
• Standard power supply of the pump is 230Vac 50-60Hz, with 24Vac option on request. 
• PTFE material diaphragm. 
• Comes with valve for manual purge.
• The casing is made of PP plastic, fiberglass reinforcement and IP65 protection. 
• Control panel: 

            - Fixed green led turns off with each stroke the pump performs. 

            - Flashing green led with the potentiometer at 0. 

• Depending on the chemical to be dosed, the best gaskets are: 

            - pH reducer--> VITON or EPDM seals.

            - pH increaser--> EPDM gaskets

            - Liquid chlorine--> VITON gaskets 

Technical characteristics AMS series

Model	Pressure	Flow rate	cc/stroke	Injections/minute	Connections (mm)
	bar	l/h			Suction	Discharge
200	10	3,0	160	0,31	4/6	4/6
	8	5,0		0,52

Guide for the selection of dosing pumps

When selecting the metering pump model or its spare parts, it is essential to take into account the coding found on the side label. This coding not only identifies the model, but also provides crucial information, such as hydraulic characteristics, materials of the different components, power supply...

We consider the model AMS200AHH1000 to explain the coding:

1. The first field corresponds to the model: AMS

2. The second field corresponds to the hydraulic characteristics: 200

3. The third field refers to the voltage of the dosing pumps: A

4. The fourth field refers to the head material: H

5. The fifth field refers to the installation kit: H

6. The sixth field refers to the seals: 1

The seals are crucial components in a dosing pump, and their choice must be based on the nature of the liquid to be dosed. We recommend that you consult the compatibility table to identify the most suitable seals according to the type of liquid you are dosing.

• FKM-B or Viton: normally used for acidic products.
• EPDM: normally used for alkaline products.

7. The seventh field is standard: 0

8.  The eighth field refers to customizations:00

Kompact AMS pump components

	1	Área de regulaciones
	2	Cabezal dosificador
	3	Válvula de cebado
	4	Racor de impulsión
	5	Racor de aspiración
	6	Soporte de montaje

Wall bracket drilling template

Packing contents AMS pump

• Complete pump
• Bottom filter (Fig. 1)
• Injection fitting (Fig.2)
• 4 meters of PVC pipe (transparent and flexible), for suction and for the connection of the bleed valve for manual priming (Fig.3)
• 2 meters of PE pipe (opaque and rigid), for the connection of the pump outlet with the injection point (Fig.3)
• Plugs for fixing the pump
• Bracket for wall mounting
• Instruction manual
• Power cable (2m)

Dimensions Kompact AMS series

AMS pump control panel

A: Potentiometer for flow rate % regulation

• The pump doses the selected percentage manually with the potentiometer.

B: Dosing LED 

• Fixed green LED goes off with each stroke of the pump
• Green LED flashing when the potentiometer is set to 0