Subtotal €0.00
Shipping To determinate
Total (VAT incl.): €0.00
Standard PVC-U PE-EPDM Ball Valve for threading
search
  • Standard PVC-U PE-EPDM Ball Valve for threading

Standard PVC-U PE-EPDM Ball Valve for threading

2466
  • PVC-U PE-EPDM ball valve for threading 
  • PVC accessory to open or close the fluid passage
  • Excellent flow characteristics 
  • Sizes from 3/8" to 4".
€17.27
Diameter

+ shipping costs, see here
100% secure payments

Order it before 16:00 on Wednesday and receive it between Thu 4 April and Mon 8 April with Transporte MomentosPiscina

verified reviews(1)

Darko G. published the 03/01/2023 following an order made on 27/12/2022

5/5

As presented on your site and quick delivery

×
Description

PVC ball valve

The ball valve or stopcock is the perfect PVC-U accessory to open and close the flow of fluid and thus have control. It is a PVC accessory from Cepex that distinguishes itself from other brands for its quality and guarantee, as demonstrated by its certifications: ISO 16135, NSF, among others.

Cepex offers a complete range of ball valves in different materials (PVC-U, PVC-C) and different lines of valves in different standards (Metric, BSP, ASTM, NPT, JIS) to adapt to the demands and needs of each market.

Features PVC-U ball valves - Standard Series

  • Antiblock" system that avoids the ball blocking.
  • 100% factory tested
  • Minimal pressure drop
  • Low opening and closing torque
  • Resistance to multiple inorganic chemicals
  • Excellent handling characteristics 

Specifications standard threaded ball valve

  • PVC-U body
  • Female thread
  • Metric series
  • HDPE ball seat seals
  • O-rings in EPDM
  • Blue marking: EPDM seals, to be chosen according to the fluid. 

Note: It is important to choose the type of valve according to the fluid and therefore to choose between EPDM or Viton (FPM) seals. 

Dimensions PVC-U PE-EPDM threaded ball valve 

The following table shows the outer diameter, the normal pressure, and the references of the PVC-U PE-EPDM ball valve to be threaded:

Dimensions PVC-U PE-EPDM threaded ball valve

See the following table for the dimensions of the PVC-U ball valve according to the outside diameter.

Dimensions PVC-U PE-EPDM threaded ball valve

Standard ball valve components

Standard ball valve components

  1. PVC-U stem
  2. PVC-U ball
  3. PVC-U nut
  4. PP handle assembly
  5. PVC-U union sleeve
  6. Ball seat HDPE / PTFE
  7. Shaft seal EPDM / FPM
  8. EPDM / FPM body seal
  9. EPDM / FPM cushioning seal
  10. EPDM / FPM sleeve seal
  11. Body PVC-U
  12. Gasket holder PVC-U

Assembly instructions

For a correct assembly of the ball valve, follow the instructions below:

Assembly instructions

  1. Loosen the nuts on the valve and separate them from the sleeves.
  2. Insert the nuts into the pipes and fix the sleeves on the pipe ends.
  3. In the joints to be glued, use adhesive for PVC-U or rigid PVC-C pipes and do not apply pressure until 1 hour per bar.
  4. In the joints to be threaded, place PTFE tape on the male threads.
  5. Place the valve between the sleeves and tighten the nuts on the valve.

Pressure/temperature diagram

Pressure / temperature diagram

Data sheet
Diameter
1¼”
1½”
1”
2½”
2”
3”
4”
4” (DN 80)
½”
¾”
⅜”
Union
Threading
ean13
8435099206866