Pump DAB Europro 150M

Reference: 60211590

DAB pump Europro 150 M.
Pool pump 1,5 HP M.
Improved lid for strength and easy cleaning.
Built-in filter with large capacity.
For the recirculation of water in domestic and residential swimming pools.
Dimensions mouths suction and drive 2 ".
Pump suitable for swimming pools with saline chlorination.
Model currently not available, its compatible model is the DAB Euroswim 150M:

- It has the same connections, so it is totally interchangeable.

- It has the same dimensions and hydraulic performance (flow rate).

- Just changes the lid opening

+ shipping costs, see here

Description

PUMP DAB EUROPRO 150 M

The single phase DAB Europro 150 1,5 HP water pump manufactured by DAB PUMPS is perfect for domestic and residential swimming pools. The Europro pump range provides high performance and an engine completely isolated from water.

PUMP FEATURES DAB EUROPRO

DAB pumps for swimming pools cover all the demands of the domestic and residential market with a range of motor powers from 1/2 HP to 3 HP. They are also suitable for applications that require the use of aggressive liquids, fish farms, agriculture and industry.

The design of these centrifugal pumps has evolved with an improved lid with greater resistance to internal pressure and easy maintenance. Silent and reliable engine, with a low noise emission of 60 dB and high efficiency of efficiency providing well-being and tranquility in the pool environment. Reliability and high performance is what characterizes this range of Europro DAB pumps.

All Europro water pumps include 2 "suction and delivery fittings and are reinforced with metal rings.

ELECTRICAL CHARACTERISTICS PUMP POOL DAB EUROPRO 150 M

Motor Type: Asynchronous
Type of service: continuous
Electrical insulation: class F
Degree of protection: IP55
Single-phase series voltage: 220/240 V 50Hz
Three-phase series voltage: 230/400 V 50Hz
Ball bearings: waterproof, water and moisture resistant
Service factor: S1

PUMP MATERIALS FOR POOL DAB EUROPRO 150 M

Pump body and a threaded pre-filter made of technopolymer reinforced with glass fibers.
Cover pre-filter made of transparent polycarbonate and anti-oxidation to ensure constant visibility.
Filter of nylon.
Turbine made of technopolymer reinforced with glass fibers, designed to ensure a total coverage and insulation of the motor shaft from the pumped liquid.
Diffuser of technopolymer reinforced.
Mechanical seal of carbon, alumina, NBR and AISI 316.
O-ring of the NBR pump body, screws and bushes in AISI 316 steel.
Plugs of butterfly for the filling and drainage, are not required to use tools to disassemble them and reassemble them.

TECHNICAL DATA EUROPRO 150 M

Full operating range up to 42 m3 / h with lifting height of up to 22 m.
Pumped liquid: clean or dirty water with suspended solids, water with chlorine / bromine percentages or water treated with saline chlorination.
Ph range: 6.5-8.4
Maximum liquid temperature (ºC): 60
Maximum ambient temperature (ºC): 50
Maximum working pressure (bar): 2.5

TECHNICAL DATA EUROPRO 150 M