Subtotal €0.00
Shipping To determinate
Total (VAT incl.): €0.00
Dosing pump SEKO TEKNA TCK
search
  • Dosing pump SEKO TEKNA TCK
  • Dosing pump SEKO TEKNA TCK
  • Dosing pump SEKO TEKNA TCK
  • Dosing pump SEKO TEKNA TCK
  • Dosing pump SEKO TEKNA TCK

Dosing pump SEKO TEKNA TCK

TCK603NHH0000
  • SEKO Tekna TCK electromagnetic dosing pump controlled by digital interface and proportional flow.
  • It has a timer with up to 10 dosing timings. 
  • Programmable timer relay by dry contact activation. 
  • In the section ''attachments'', you will find a file with the meaning of each letter of the reference of your pump, to know its characteristics. 
  • Easy assembly and replacement of the connections.
  • Manufacturer's references (you will find it on the side of the pump): 

                  -TCK 603 VITÓN seal (FPM): TCK603NHH0000

                  -TCK 603 EPDM seal:  TCK603NHH1000

                  -TCK 800 VITÓN seal (FPM): TCK800NHH0000

                  -TCK 800 EPDM seal:  TCK800NHH1000

                  -TCK 803 VITÓN seal (FPM): TCK803NHH0000

                  -TCK 803 EPDM seal:  TCK803NHH1000

€399.00
Model

+ shipping costs, see here
100% secure payments

Order it before 16:00 of today and receive it between tomorrow and Fri 22 March with Transporte MomentosPiscina Gratuito

Description

Dosing pump Seko

SEKO pumps offer solutions for injecting liquid into ducts and pipes from small pools to large water installations. In indoor and outdoor environments, depending on the model, they can measure parameters such as pH, ORP, conductivity, chlorine, oxygen, turbidity, ozone, bromine, etc. In our attached files, you can find a list with the compatibility of the body, gaskets and pipes of the dosing pumps according to the chemical you need to dose.

Tekna dosing pump 

The Tekna Series is a range of solenoid driven metering pumps with analog or digital range with constant or proportional dosing. These multifunctional metering pumps ensure high performance for the chosen applications and provide high reliability by ensuring chemical compatibility in wetted parts. Depending on the field of application, pressure, flow rate and desired performance, you can choose between Tekna AKS, AKL, TPG, TPR and TCK

Characteristics of Seko Tekna TCK dosing 

  • Digital electromagnetic pump with constant or weekly timed flow rate.
  • Standard pump power supply is 100-240Vac 50-60Hz.
  • PVDF pump heads as standard
  • PTFE diaphragm material
  • Incorporates valve for manual purge
  • The casing is made of PP plastic, fiberglass reinforcement and IP65 protection.
  • Timed dosing with a programmable weekly timer.
  • Programmable timer relay by activating a dry contact.

Technical characteristics TCK series

Model Pressure Flow rate cc/stroke

Injections/minute

Connections (mm)
bar l/h Suction Discharge
603 12 4,0 160 0,42 4/6 4/6
10 5,0 0,52
8 6,0 0,63
2 8,0 0,83
800 16 7,0 300 0,38 4/6 4/6
10 10,0 0,56
5 15,0 0,83
1 18,0 1,00
803 5 20,0 300 1,11 8/12 8/12
4 32,0 1,78
2 62,0 3,44
0,1 110,0 6,11

Guide for the selection of dosing pumps

When selecting the metering pump model or its spare parts, it is essential to take into account the coding found on the side label. This coding not only identifies the model, but also provides crucial information, such as hydraulic characteristics, materials of the different components, power supply...

We consider the model TCK800NHH0000 to explain the coding:

1. The first field corresponds to the model: TCK

2. The second field corresponds to the hydraulic characteristics: 800

hidraulica

3. The third field refers to the voltage of the dosing pumps: N

alimentación

4. The fourth field refers to the head material: H

cabezal

5. The fifth field refers to the installation kit: H

kit instalacion

6. The sixth field refers to the seals: 0

The seals are crucial components in a dosing pump, and their choice must be based on the nature of the liquid to be dosed. We recommend that you consult the compatibility table to identify the most suitable seals according to the type of liquid you are dosing.

  • FKM-B or Viton: normally used for acidic products.
  • EPDM: normally used for alkaline products.

juntas

7. The seventh field is standard: 0

opcional

8.  The eighth field refers to customizations:00

opcional

Tekna TCK pump components

Tekna TCK pump components 1 Power switch
2 Adjustment area
3 Dosing head
4 Activation valve
5 Delivery fitting
6 Suction fitting
7 Base support

Package contents TCK pump

  • Complete pump
  • Bottom filter (Fig. 1)
  • Injection fitting (Fig. 2)
  • 4 meters of PVC pipe (transparent and flexible), for suction and for the connection of the bleed valve for manual priming (Fig.3)
  • 2 meters of PE pipe (opaque and rigid), for the connection of the pump outlet with the injection point (Fig.3)
  • Plugs for fixing the pump
  • Bracket for wall mounting
  • Instruction manual
  • Power supply cable (2m)

Package contents TCK pump

Dimensions TCK dosing pump

Dimensiones tekns TCK 603-800 Dimensiones TCK 803-min.JPG Dimensiones TCK 603-800-803-min.JPG
603-800 803 603-800-803

Performance curve Tekna TCK series

Performance curve Tekna TCK series

Performance curve Tekna TCK series

TCK pump control panel 

TCK pump control panel

Data sheet
Type of pump
Electromagnetic
Pump control
Digital
Level control input
No
Automatic control
No
Attachments

Download

Download (130.91KB)
file_download
file_download
Productos relacionados

Dosing pump SEKO Invikta KCS

€155.00

Dosing pump SEKO TEKNA AKS

€185.00

Dosing pump SEKO TEKNA TPR

€439.00

Dosing pump SEKO KOMPACT AMS 200

€164.90