Product to clog pores or small cracks in the surface or in the hydraulic circuit of the pool or spa
Add directly to the perimeter of the pool or via the skimmer in order to improve their performance
In 24 hours you will have the problem solved
Product efficacy spectacular
DOSE OF EMPLOYMENT: 1L/75 m3
How to use Sealant fufas Aqua Stop
Turn off the pool pump, put the filter in a position to BY-PASS or RECIRCULATION, it is important that the product does not pass through the filter.
Add 1L for each 75 m3 of water.
to. If the leak is in the glass of the pool, adding the product directly into the surface water. b. If you do not know where the leak is, or is located in the pipes, add the product through the skimmer.
Past 40 minutes to hook up the pump and make it work for a minimum of 8 hours.
Mark the level of the water, and after 24 hours check to see if has changed.
Pools very large, you may need a second application of the product.
Once the product has acted, you can put the filter in the normal position.
After 24 hours of adding the product, you may bathe in the water of the pool.
Vicente Jose F.
published the 23/05/2019following an order made on 19/05/2019
Special product for finishing with fats and oils accumulated in the water of the swimming pool
Brings together the particles, not deposited in the bottom of the glass and the filter retains it.
Product indicated for...
Antifouling for swimming pools with electólisis saline.
Prevents lime encrusting and decrease the surface of contact with the water in the cells of Titanium.
A very economic and simple equipment will give you a...