DECAL is a limipador detergent designed for the surfaces of the pool. It can also be used for the cleaning of the inside of the filter (sand or silica).
DECAL eliminacia the inscrustaciones calcareous, organic waste and sediment minerals over time will be formed and adhere to the surfaces of the pool.
DOSAGE AND MODE OF EMPLOYMENT
For the general cleaning of the empty pool:
- Apply DECAL undiluted on the surfaces to clean, extending the product on the walls and the bottom of the pool.
- Let the product act for 1/2 hour and rinse with plenty of water.
- Repeat in case of heavy fouling. If it is convenient to help by rubbing with a brush.
- You can apply the DECAL with a spray bottle, which is not a mist or a watering can.
- The consumption of the product is 20 L. for each 100 m3 of pool.
For the cleaning of filters (sand or flint):
- Completely empty the water from the interior of the filter.
- Open the filter by the top and pour inside DECAL making sure to cover the filter media.
- Let the product work for approximately 30 minutes.
- Close the filter and performs an intensive wash.
- Before the cleaning of the glass of the pool, thoroughly wet all surfaces with water.
- After cleaning, remove the product by rinsing the surfaces with abundant water.
- Avoid working with direct sun, so that the product does not dry on the walls.
- Apply the product undiluted.