The use of TRICHLOR as a sanitizer ensures free chlorine residual in the pool
The chlorine resiudal free is water with disinfectant and is inpresdincible to destroy those microorganisms that can be introduced after the water is already disinfected.
To CONTROL THE RESIDUAL CHLORINE (water with disinfectant)
The free chlorine recommended in a piscian should never be lower than 1 ppm. Less than 1 ppm of free chlorine will allow for the growth of bacteria and algae in the water, causing unsanitary conditions and unpleasant.
The exact amount of chlorine needed to maintain 1 ppm of free chlorine will depend on the number of swimmers, sunlight, and the temperature of the water or weather conditions.
TRI-CHLOR: CHLORINE MAINTENANCE FOR SWIMMING POOLS
- Compound granular
- Packaging of 1 Kg
- Chlorine slow dissolving for the regular maintenance and continued of the water of the swimming pool
Properties chlorine TRICHLORO GR 90% grain - pack 1 Kg
|Chlorine content useful
||2 - 3
||1.2 g/100 ml
- Initial treatment: Add 10 g of TRICHLORO GR for every m3 of water.
- Maintenance treatment: With water pH adjusted, add daily 1 to 2 g of TRICHLORO GR for every m3 of water.
The initial treatment (supercloración), must be repeated whenever you notice a lack of transparency in the water.
MODE OF EMPLOYMENT
Introduce the necessary dose of TRICHLORO GR in the inside of a skimmer, putting then into operation the filtration equipment, to be able in this way to be dissolved the product, to circulate the water through this skimmer.
You can also divide the dose of TRICLOR GR on the surface of the pool by an equal. The addition of TRICHLORO GR will be done preferably in the evening and without the presncia of bathers in the water of the pool.
The residual chlorine must be located between 0.5 - 2 mg/l. Value that will be measured each day using a case analyzer of chlorine and pH. This control must be made a minimum of 2 times a day.